This door basket is designed to fit securely on the inner panel of select refrigerator models, providing convenient storage for items such as condiment bottles and jars. Featuring both white and clear...
This pantry drawer cover is a genuine replacement part designed for select refrigerator models. Made from clear, durable plastic, it seals the front of the pantry drawer to help maintain internal cond...
This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete ...
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
Introduce a flawless and remarkably reliable companion for your Samsung, LG, or Kenmore refrigerator, the Freezer Handle Support. A quintessential component uniquely designed to maintain the seamless ...
Keep your ice maker working smoothly with this replacement ice bucket. It holds the ice until you’re ready to dispense it, and fits neatly inside the freezer. If your old bin is cracked or broken, swa...
This refrigerator door gasket is a durable, flexible rubber seal designed to create a tight closure around the door, helping maintain proper temperatures and overall cooling efficiency. It replaces wo...
$161.85
In Stock
Questions And Answers for 79571313312
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eloy
March 26, 2023
Not cooling
For model number 79571313312
Hello Eloy, thank you for your question. To fix the issue, you may need to check the following parts: thermistor assembly, part number PS3644971, evaporator fan motor, part number PS3523323, and compressor assembly, part number PS12739218. If this does not solve the issue, then you may need to check the electronic control board, part number PS12738978. We hope this solves your problem!
Hi Eloy, thank you for reaching out. We have narrowed the issue down to the following parts: the condenser fan motor, part number PS3579388, the evaporator fan motor, part number PS3523323, the door gasket, and the control board, part number PS12738978. The door gasket is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for the discontinued part number ADX73350939. If they offer a new part number, please feel free to check back with us. Good luck with your repair!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Soak new gasket in hot water in bathtub to soften while removing old gasket. No tools required, it was a little difficult pulling old gasket out but once you get it started part way out it will come out real easy. By the time you get the old gasket out the new gasket will be warm and easy to get started into the groove it pops into. Starting on back (hinged) side is of door, begin pushing new gasket into groove. Work up and down pushing gasket into place working towards the corners and around to the front side of door. Your all done. This is a job I went into a little nervous thinking I might be calling a service man out to fix, but it turned out to be really easy.
