If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to kee...
This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities tha...
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
This deli drawer is for refrigerators. Deli drawer holds meats, vegetables and snacks in the fresh food compartment of the refrigerator. Follow the instructions in the owner's manual when installing this part.
This roller assembly supports smooth movement of racks, drawers, or drums during operation. Reduced friction improves ease of use and reduces wear. Replacing a worn roller restores quiet, smooth movement.
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mei-Ling
February 4, 2023
My freezer or fridge is not cooling or making ice. Is this likely a computer problem that is repairable?
For model number 79570323311
Hello Mei-Ling, thank you for your question. There can be several reasons for your issues. You will need to do some testing to see if any of these units are malfunctioning. The Evaporator Fan Motor PS3523323. The Condenser Fan Motor PS3523330. The Thermistor PS8751179. Good luck with your repair.
Where is water filter and how to change it? Could you please send me a video to illustrate. Thanks!
For model number 79570323311
Hello Yingguo, Thank you for the question. We have researched the model you have provided and have found this model did not come equipped with a filter. The water would be filtered before being supplied to the appliance by an in house water filtration system. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Russ
August 6, 2025
We have leaking in both Humidity Controlled Crisper drawers?
Where is this coming from?
For model number 79570323311
Hello Russ, thank you for contacting us. The defrost drain might be clogged or frozen, causing water to overflow into the crisper drawers. Check the defrost drain to see if it's clogged or frozen. If it's frozen, thaw the ice and flush the drain with hot water to ensure it's clear of debris. The water inlet valve supplies water to the dispenser and icemaker. If the valve is cracked or has a loose fitting, it can cause leaks. A damaged door gasket can allow warm, humid air to enter the refrigerator or freezer compartment, creating condensation that can leak into the crisper drawers. We hope this information helps!
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
