Models > 79071312705

79071312705 Kenmore Range - Overview

Sections of the 79071312705

[Viewing 5 of 5]

Manuals & Care Guides for 79071312705

Click to download
Keep searches simple, eg. "belt" or "pump".
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(7)
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.16
  In Stock
Natural Gas to Liquid Propane Conversion Kit – Part Number: GRLP3
Natural Gas to Liquid Propane Conversion Kit
★★★★★
★★★★★
(2)
PartSelect #: PS2351422
Manufacturer #: GRLP3
This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.
$83.58
  In Stock
PROBE – Part Number: 316233903
PROBE
★★★★★
★★★★★
(4)
PartSelect #: PS11731754
Manufacturer #: 316233903
Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
$33.74
  In Stock
Oven Light Socket – Part Number: 316116400
Oven Light Socket
★★★★★
★★★★★
(5)
PartSelect #: PS439060
Manufacturer #: 316116400
$67.38
  In Stock
HANDLE SET – Part Number: 5304530039
HANDLE SET
★★★★★
★★★★★
(1)
PartSelect #: PS16731294
Manufacturer #: 5304530039
Screws are not included.
$160.77
  In Stock
Oven Rack – Part Number: 316067902
Oven Rack
★★★★★
★★★★★
(1)
PartSelect #: PS437923
Manufacturer #: 316067902
Sold individually.
$113.44
  In Stock
OVERLAY – Part Number: 316220728
OVERLAY
★★★★★
★★★★★
(2)
PartSelect #: PS12114508
Manufacturer #: 316220728
White in color. Overlay only.
$67.76
  In Stock
Sealed Burner Head - 14k – Part Number: 316223400
Sealed Burner Head - 14k
PartSelect #: PS820297
Manufacturer #: 316223400
$95.25
  In Stock
LEVELING LEG ASSY – Part Number: 5304509869
LEVELING LEG ASSY
★★★★★
★★★★★
(2)
PartSelect #: PS12364627
Manufacturer #: 5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$9.82
  In Stock
Oven Burner Igniter – Part Number: 5304509706
Oven Burner Igniter
PartSelect #: PS12071409
Manufacturer #: 5304509706
$184.93
  In Stock
White Touch up Paint – Part Number: 5303321319
White Touch up Paint
★★★★★
★★★★★
(1)
PartSelect #: PS467298
Manufacturer #: 5303321319
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
$17.68
  On Order
Oven Door Seal with Clips – Part Number: 316239700
Oven Door Seal with Clips
★★★★★
★★★★★
(4)
PartSelect #: PS440011
Manufacturer #: 316239700
Also known as gasket.
$152.52
  In Stock

Questions And Answers for 79071312705

Be the first to ask our experts a question about this model!

Common Symptoms of the 79071312705

[Viewing 8 of 8]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Safety valve would not open
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Parts Used:
Safety Valve
  • Ed from Darby, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
124 of 156 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bought a new gas oven that did not come with a propane conversion kit.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.
Parts Used:
Natural Gas to Liquid Propane Conversion Kit
  • Denny from Bishop, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench set
123 of 177 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove was set up for natural gas and needed to be converted to LP
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done.
Parts Used:
Natural Gas to Liquid Propane Conversion Kit
  • Ed from Orange, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
117 of 191 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!