66544042301 Kenmore Cooktop - Overview
Sections of the 66544042301
[Viewing 1 of 1]
Manuals & Care Guides for 66544042301
Click to downloadKeep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS3651485
Manufacturer #: W10491985
Sold individually.
$10.20
In Stock
Order within the next 6 hrs and your part ships today!
Range Main Power Terminal Block
PartSelect #: PS11745232
Manufacturer #: WP8203546
Sold individually.
$31.17
In Stock
Order within the next 6 hrs and your part ships today!
Refrigerator Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$10.09
In Stock
Order within the next 6 hrs and your part ships today!
Surface Element - 1200W RF - Liner OR lower
PartSelect #: PS11745655
Manufacturer #: WP8285230
This 6-inch heating element helps your electric range cook evenly and reliably. It glows red when heating and provides steady heat for boiling or simmering. Easy to install and built to last, it’s a g...
$205.30
In Stock
Order within the next 6 hrs and your part ships today!
Range Screw
PartSelect #: PS11740977
Manufacturer #: WP3196163
This screw is sold individually.
$10.20
Special Order
Cooktop Mounting Bracket & Screw
PartSelect #: PS1486367
Manufacturer #: 8186533
$66.36
In Stock
Order within the next 6 hrs and your part ships today!
Radiant Surface Burner Element
PartSelect #: PS11745675
Manufacturer #: WP8285845
$351.50
Special Order
Surface Element - 1800/1000W
PartSelect #: PS2376611
Manufacturer #: W10203295
$275.77
Special Order
Range Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
10-32 hex - Sold Individually - Appliance originally takes 3 of this item.
$10.20
In Stock
Order within the next 6 hrs and your part ships today!
Screw
PartSelect #: PS11741527
Manufacturer #: WP3400093
$10.09
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for 66544042301
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 66544042301
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Loose terminal caused block to overheat and break
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well.
Parts Used:
-
Dana from Black Mountain, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Parts Used:
-
Frank from Palm Coast, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire came loose and shorted out
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Parts Used:
-
Elizabeth from HOUSTON, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!