This door hinge supports smooth opening and secure closure by maintaining correct door alignment. Proper hinge function helps preserve door sealing and prevents uneven wear. Replacing a worn hinge res...
$120.95
In Stock
Order within the next 9 hrs and your part ships today!
This door hinge supports the dishwasher door for smooth operation and a secure seal. Durable and easy to install, it fixes issues like poor closure or door misalignment.
$164.52
In Stock
Order within the next 9 hrs and your part ships today!
Looking for a way to boost your dishwasher's efficiency? Check out the Whirlpool Dishwasher Door Brace. This is an authentic Whirlpool replacement part, specially designed to make sure your dishwasher...
$35.15
In Stock
Order within the next 9 hrs and your part ships today!
Having trouble with your Whirlpool appliance? Our genuine OEM Black Access Panel could be just what you need to get it running like new again. Designed specially for a range of Whirlpool models, this ...
$107.75
In Stock
Order within the next 9 hrs and your part ships today!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patty
May 20, 2025
I need to replace the 4 wheel assemblies on the lower rack of my Kenmore Elite dishwasher. Unable to find the assemblies to purchase. Can you help?
For model number 66513922K015
Hello Patty, thank you for reaching out. The lower dishrack roller assembly you are looking for is part number PS11750057. This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. We hope this information is useful!
My wife hired a local repairman when the right side spring cable broke (I was out of town). He took two hours to fix it (and two appointments). The door would then pop open when running. He came back and replaced the latch. Problems persisted. I then ordered new hinges and replaced both in half hour or so. Would recommend doing all of these repairs yourself. None of these repairs are that hard and definitely not worth paying hundreds to do it. Trickiest part is pulling the dishwasher out from the counter without impacting the electrical or water connections. Disconnecting the power is important on all repairs. When you take the screws out of the door to get to the hinges, make sure you have a helper just to hold the door up while removing the last few screws. The left side hinge was really bent (when the right side spring cable broke) - caused the door to be out of square and thus would not effectively close. This was obvious after a 5 minute search on this this and other repair sites. Process that I used: 1. remove screws from both sides holding dishwasher into counter (may have screws into countertop as well). 2. turn off power, 3. pull out dishwasher far enough to see hinges and springs (careful of connections), 4. remove front door screws, 5. take off front panel, 6. remove spring cables (pull cable taut and remove "hook" from hinge)., 7. unscrew two screws holding hinge to door, 8. bend metal fingers around hinge pin to be able to remove hinge., 9. attach hinge in opposite path. 10. repeat on other side (if necessary), 11. reconnect things in opposite order...test door prior to reattaching door panel. Make sure you level the unit with the adjustable feet. Make sure screws in sides of cabinet aren't too tight as it can take the unit out of square pretty easily...
simply line up the new pin with the rectangular slot in the kick panel and metal panel behind, slide the pin in and turn it with a flat blade screw driver. NOTE: the original pin was black. A black replacement part cost $29 plus shipping! A knock-off pin was only $6 plus shipping. I got the cheap one and colored it with a black Sharpee marker before installation.
