651S5 (Type 0) Bostitch Nailer - Overview

Sections of the 651S5

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Washer – Part Number: MPW6
Washer
PartSelect #: PS10249812
Manufacturer #: MPW6
  No Longer Available
TRIGGER UNIT – Part Number: 9R189916
TRIGGER UNIT
PartSelect #: PS12508046
Manufacturer #: 9R189916
$27.00
  Special Order
KIT ORING 651S5 – Part Number: 651-RB1
KIT ORING 651S5
PartSelect #: PS18985751
Manufacturer #: 651-RB1
  No Longer Available
FOOT VINYL SIDING – Part Number: 9R189925
FOOT VINYL SIDING
PartSelect #: PS18989972
Manufacturer #: 9R189925
  No Longer Available
O - RING – Part Number: 9R189926
O - RING
PartSelect #: PS18989973
Manufacturer #: 9R189926
  No Longer Available
NOSE – Part Number: 9R189930
NOSE
PartSelect #: PS18989975
Manufacturer #: 9R189930
  No Longer Available
O - RING – Part Number: 9R189910
O - RING
PartSelect #: PS18989962
Manufacturer #: 9R189910
  No Longer Available
O - RING – Part Number: 9R189911
O - RING
PartSelect #: PS18989963
Manufacturer #: 9R189911
  No Longer Available
CYLINDER SPACER – Part Number: 9R189912
CYLINDER SPACER
PartSelect #: PS18989964
Manufacturer #: 9R189912
  No Longer Available
O - RING – Part Number: 9R189913
O - RING
PartSelect #: PS18989965
Manufacturer #: 9R189913
  No Longer Available
O - RING – Part Number: 9R189919
O - RING
PartSelect #: PS18989967
Manufacturer #: 9R189919
  No Longer Available
KIT-TRIGGER VALVE – Part Number: TVA6
KIT-TRIGGER VALVE
PartSelect #: PS12531525
Manufacturer #: TVA6
Restore your tool’s performance with this complete trigger valve repair kit for brad nailers and staplers. If your tool is leaking air or frequently misfiring, replacing the trigger valve may solve th...
$70.33
  In Stock
Order within the next 6 hrs and your part ships today!
Back to Top
View More

Questions And Answers for 651S5

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More