650S5 Bostitch Nailer - Overview
Sections of the 650S5
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Spring,Head Valve
PartSelect #: PS10245675
Manufacturer #: 103767
This genuine OEM sourced hardware is specially made for use with Bostitch pneumatic staplers. It is an identical replacement for a missing or a faulty spring that was installed on a new unit. The purp...
No Longer Available
Arm,Lower Contact
PartSelect #: PS10245684
Manufacturer #: 103793
It is an authentic OEM sourced item that is specially made for use with Bostitch pneumatic staplers. This part provides an identical replacement for a missing or a faulty lower contact arm that was in...
No Longer Available
Questions And Answers for 650S5
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!