If your fridge is making too much ice or it’s melting too fast, the temperature sensor in the ice bin might be the issue. This small part keeps track of the bin’s temperature and tells the fridge when...
This cutter grid slices ice slabs into neat, even cubes using heated wires. If your ice maker is producing uneven cubes or not cutting them at all, replacing this part could help. It’s easy to install...
Got an issue with your ice maker? It's probably your Tube Water Inlet. This little superstar has one job'it supplies water to your ice maker, keeping it up and running smoothly. Made by Whirlpool, it'...
Experiencing problems with your refrigerator? We understand how crucial it is for you to have your refrigeration appliances running efficiently. That's why we bring you this genuine Blade, Fan Condens...
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plastic panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
removed the front cover below the compartment door,removed the 2 screws holding the valve to the case and removed the water lines from the valve.The process was reversed to install the new valve.
Unbolted valve from wall. Unplugged electical connection then unplugged two water lines by pulling them out of valve. Put in new valve-reinserted electrical plug and water lines. Bolted new valve back to wall.
