56494609400 Kenmore Refrigerator - Overview
Sections of the 56494609400
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Lower Dishrack Kit
PartSelect #: PS2378335
Manufacturer #: W10311986
The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 22-inch x 21-inch. Th...
$281.60
In Stock
Order within the next 9 hrs and your part ships today!
Dishrack
PartSelect #: PS12348079
Manufacturer #: W11169039
The gray upper dishrack kit replaces the original dishrack in select dishwashers. It does not come pre-assembled, so you may need to transfer rollers from your old rack if your model is non-adjustable...
$243.31
In Stock
Order within the next 9 hrs and your part ships today!
Dishwasher Upper Spray Arm
PartSelect #: PS11740654
Manufacturer #: WP304204
This spray arm is just underneath your upper rack.
$184.22
Special Order
Questions And Answers for 56494609400
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
One of the 4 latches that holds the spray arm to the top rack broke and fell off.
It just snaps back in but it was a very tight fit and took two people to force it in. Plus I had no instructions and hadn't seen it before it broke so it took a little time to figure out where it was supposed to go. The arm doesn't connected to anything except the rack. I guess water just shoots up into it from below.
Parts Used:
-
Mickey from Novato, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
19 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom rack was starting to rust away and we needed a new one
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
Parts Used:
-
pat from muncy, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rollers and clips on botton dishrack were broken
I pulled off the old clips and easily replaced them with the new clips and popped on the wheels.
I replaced 8 clips and 8 wheels in less than 15mins
I replaced 8 clips and 8 wheels in less than 15mins
Parts Used:
-
Diane from Waltham, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
20 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!