41963 (ASTESEU) LG Washer Dryer Combo - Overview
Sections of the 41963
[Viewing 3 of 3]
Exact Part matches for your search term
[Viewing 1 of 1]
DISCONTINUED
This part number matches the current model number 41963
PartSelect #: PS2042205
Manufacturer #: 41963
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
This hot water inlet valve is designed to regulate water flow into the washing machine during operation. Featuring a standard hose fitting inlet and a single water outlet, it opens as needed to allow ...
$78.09
In Stock
Water Inlet Valve - Cold
PartSelect #: PS11728995
Manufacturer #: 5220FR2075L
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
$111.68
In Stock
Washer Hose with Bellows
PartSelect #: PS3523347
Manufacturer #: 4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
$63.78
In Stock
Magnetic Door Plunger
PartSelect #: PS3618292
Manufacturer #: AGM73610701
The magnetic door plunger attaches to the inner door panel of your washer and will hold the door open when the washer is not in use and allows the door and tub seal to dry. By doing this it will preve...
$78.50
In Stock
Shock Absorber Kit
PartSelect #: PS3522313
Manufacturer #: 383EER3001J
This kit includes 1 shock absorber and 2 pins.
$79.90
In Stock
Tub-to-Pump Drain Hose
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This hose has bellows to allow for flexibility during the wash and spin cycles.
$80.21
In Stock
Detergent Dispenser
PartSelect #: PS3522644
Manufacturer #: 3891ER2003A
The blue plastic detergent dispenser holds the detergent and then dispenses it into the washer during the wash cycle. If the detergent dispenser is broken, lost, or if the detergent is not dispensed d...
$36.85
In Stock
Washer Gasket
PartSelect #: PS3535219
Manufacturer #: MDS62058301
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
$56.87
In Stock
Pump Filter
PartSelect #: PS3522306
Manufacturer #: 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
$33.92
In Stock
Door Boot Seal
PartSelect #: PS6448330
Manufacturer #: MDS47123608
This door boot seal is designed to create a watertight barrier between the drum and door of front-load washing machines, helping prevent leaks and maintain efficient operation. Over time, the seal may...
$228.59
In Stock
Washer Switch Assembly
PartSelect #: PS7792232
Manufacturer #: EBF61315802
This door lock switch is a key component in compatible washing machines, designed to signal the control board when the door is securely closed. Once engaged, it enables the locking mechanism and allow...
$205.79
In Stock
Questions And Answers for 41963
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 41963
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Parts Used:
-
Omnitech from Warrenville, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
157 of 178 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Parts Used:
-
Leslie from STOWE, VT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
51 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve leak
Followed directions on the video and went like a charm. Very impressed with service and video
Parts Used:
-
John from Northport, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
34 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!