41747102701 Kenmore Washer - Overview
Sections of the 41747102701
[Viewing 5 of 5]
Manuals & Care Guides for 41747102701
Click to downloadInstall
Installation Instructions
(0.87MB)
Manual
Owner's Manuals
(1.38MB)
Specs
Product Specifications Sheet
(0.49MB)
Care
Use and Care Manual
(0.77MB)
Wiring
Wiring Diagram
(0.49MB)
Keep searches simple, eg. "belt" or "pump".
Door Striker
PartSelect #: PS2378364
Manufacturer #: 131763302
This part is found on the door of your washer and keeps your door closed for use.
$43.07
In Stock
Shock Absorber Kit
PartSelect #: PS3508101
Manufacturer #: 5304485917
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
$61.05
In Stock
Front Load Washer Door Lock and Switch Assembly
PartSelect #: PS12364048
Manufacturer #: 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the do...
$183.11
In Stock
Drain Pump - 60Hz 120V
PartSelect #: PS2342445
Manufacturer #: 137108000
This drain pump helps your washer get rid of water during the cycle. If your machine isn’t draining properly or leaves water behind, this part could be the fix. It’s made to fit many front-load models...
$232.29
In Stock
Drive Belt - 6 ribs
PartSelect #: PS419285
Manufacturer #: 134051000
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are...
$28.77
In Stock
Tub-To-Pump Hose
PartSelect #: PS418742
Manufacturer #: 131784700
When your washer needs a little TLC, we have the perfect solution for you. This Tub-to-Pump Hose is specially designed to fit various models of Frigidaire, Electrolux, White Westinghouse, and Tappan w...
$123.45
In Stock
Drum Vane
PartSelect #: PS417359
Manufacturer #: 131274600
Also known as a Drum Baffle. Sold individually.
$79.85
In Stock
Bellow with Clamp
PartSelect #: PS900237
Manufacturer #: 5303937187
This door bellow kit forms a watertight seal between the drum and door of front-load washers, allowing the tub to spin freely while preventing leaks. It fits a variety of models and is commonly replac...
$177.93
In Stock
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$27.85
In Stock
Screw-In Plastic Leveling Leg
PartSelect #: PS1152204
Manufacturer #: 134548800
Sold individually.
$32.89
In Stock
Single Shock Mounting Pin
PartSelect #: PS417323
Manufacturer #: 131268300
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
$29.73
In Stock
Questions And Answers for 41747102701
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 41747102701
[Viewing 16 of 16]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Parts Used:
-
Joy from Columbia, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
572 of 591 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Parts Used:
-
DOUG from KING FERRY, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
475 of 561 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both vibration shock absorbers broken
removed 2 screws and removed top access cover. removed 2 screws and removed front access cover. removed 4 retaining pins (one with nammer and punch because it was stuck) connected lower ends of new shocks with plastic pins, extended each shock to slip fit and connected upper ends to wash tub mounts. Reinstalled panels. I wish I could say that it all went well from there but......when the shocks broke, apparently the hit the motor took was enough to cause an electronic failure of the speed cycle control chip. Now Im waiting for that part.
Parts Used:
-
Douglas from Medical Lake, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
180 of 195 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!