3633042992 Kenmore Range - Overview

Sections of the 3633042992

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(3)
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
$19.10
  Special Order
Light Cover – Part Number: WB36X192
Light Cover
★★★★★
★★★★★
(1)
PartSelect #: PS247415
Manufacturer #: WB36X192
$27.85
  Special Order
Broiler Pan - Large – Part Number: WB48X10056
Broiler Pan - Large
★★★★★
★★★★★
(1)
PartSelect #: PS1517612
Manufacturer #: WB48X10056
Includes the pan and grate.
$68.19
  Special Order
Screw – Part Number: WH2X930
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$13.95
  Special Order
Limit Switch – Part Number: WB24K5085
Limit Switch
PartSelect #: PS236641
Manufacturer #: WB24K5085
$69.37
  Special Order
OVEN DOOR GASKET – Part Number: WB32K5037
OVEN DOOR GASKET
PartSelect #: PS244568
Manufacturer #: WB32K5037
  No Longer Available
HINGE OV Door LT – Part Number: WB14K5007
HINGE OV Door LT
PartSelect #: PS231443
Manufacturer #: WB14K5007
$95.98
  Special Order
HINGE OV Door RT – Part Number: WB14K5006
HINGE OV Door RT
PartSelect #: PS231442
Manufacturer #: WB14K5006
  No Longer Available
LEVER LOCK – Part Number: WB15K5016
LEVER LOCK
PartSelect #: PS231804
Manufacturer #: WB15K5016
$59.10
  Special Order
OV BURNER Assembly – Part Number: WB16K5012
OV BURNER Assembly
PartSelect #: PS232427
Manufacturer #: WB16K5012
  No Longer Available
Lower FRONT PANEL Assembly-BLA – Part Number: WB56T10006
Lower FRONT PANEL Assembly-BLA
PartSelect #: PS252119
Manufacturer #: WB56T10006
  No Longer Available
OV Door INTERMEDIATE GLASS – Part Number: WB57K5093
OV Door INTERMEDIATE GLASS
PartSelect #: PS252880
Manufacturer #: WB57K5093
  No Longer Available

Questions And Answers for 3633042992

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Interior light needed replaced
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Parts Used:
Light Bulb - 40W
  • Leo from TWIN FALLS, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
22 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appliance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Parts Used:
Light Bulb - 40W
  • Barbara from BELLEVUE, WA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
15 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light inside the oven had burned out
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Parts Used:
Light Bulb - 40W
  • Catherine from SEATTLE, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!