This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$145.77
In Stock
Order within the next 5 hrs and your part ships today!
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
$20.45
In Stock
Order within the next 5 hrs and your part ships today!
This door gasket is for the freezer door on the refrigerator. The gasket is grey in color. This part is approximately 34-1/2" wide x 24" long. The door gasket is on the inner door panel and creates a ...
$204.03
In Stock
Order within the next 5 hrs and your part ships today!
The water inlet valve supplies water to the refrigerator ice maker and water dispenser.
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears...
$207.13
In Stock
Order within the next 5 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nilesh
November 11, 2019
Hi i have eror code of sy ef so which part i have to replace thanks for your help
For model number 25370313211
Hello Nilesh and thanks for writing.
I understand you are receiving an "SY EF" code on your refrigerator, model# 25370313211. The "SY EF" code stands for system error with the evaporator fan. This possibly means that there is something going on with your evaporator fan. We hope this helps. Please contact us at any time
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marlène Flambert
December 12, 2019
Where is located the defrost timer
For model number 25370313211
Hello Marlene, thank you for your question. The defrost timer is part of the main electronic control board in the unit, which is PartSelect Number: PS9495117. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Art
September 22, 2022
No ice making, water dispensing ok. Rust spot on back of fridge approx 12" from top and slightly to right
For model number 25370313211
Hello Art, thank you for your question. We have researched your model and found that the issue is probably with the Ice Maker Assembly, part number PS16221322. If that does not take care of the issue, then the problem is most likely to be related to the Water Inlet Valve, part number PS7321353. Also, check the water supply to the ice maker assembly. If you require assistance to place an order, please contact customer service. We hope that helps!
SY CF code.
Communication failure code, what could activate this code. A loose wiring connection or a defective part?
For model number 25370313211
Hello Anthony, thank you for getting in touch. The error code SY CF means that there is a communication error between the display and the main refrigerator controls. Try to unplug the unit for a few minutes. If that does not help, check the wire harness between the controls and the connections. The next step is to replace both the display board, part number PS3503319, and the main control board, part number PS9495117. We hope this helps, good luck with the repair!
Ice maker and water dispenser not working, outside back panel of refrigerator is rusting and ice accumulating. Ice is also accumulating on inside back wall under ice maker.
For model number 25370313211
Hello Denise, Thank you for the question. it sounds like the Dispenser is not closing properly and causing the Ice Build up. The Ice Dispenser Electronic Control may be faulty and need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
removed fan unit from frig and installed new motor and then replaced back in frig. No tools needed. need to unplug unit and take apart and put new motor in the unit and then plug back in.
To confirm my diagnosis I first replace the filter still no water flow. Check water supply from the wall valve: ok Remove the entire inlet valve assembly and sit it over a small bucket. Disconnect the tubing from the bottom of the 1st selenide valve: this is the one leading to the filter. Place cup under water dispenser and activate dispenser. No water discharge from inlet valve confirm valve is bad. Install the new valve matching the colored tubing with the color on each inlet valve. Re-connect the water supply place container under water dispenser and activate: There will be a large gush of air then water. Dispense aprox 1 gallon of water to confirm all the air is purged from the system. Your refrigerator is now back to dispensing water and making ice. Good luck everyone - Neville
