25370085011 Kenmore Air Conditioner - Overview
Sections of the 25370085011
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Thermistor
PartSelect #: PS2359381
Manufacturer #: 5304471276
The thermistor on your home air conditioning unit monitors the room temperature. If you discover that your air conditioner is malfunctioning, or will not maintain a consistent temperature, you may hav...
$42.53
Special Order
Questions And Answers for 25370085011
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 25370085011
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Power doesn't turn off. Compressor continues to run when control switch is off.
1. Most importantly, unplug the a/c unit from the electric wall socket for safety.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
Parts Used:
-
Mary Grace from WOODSIDE, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The display was flashing 0.5 off and on then it wouldn’t power up
I took the face of the air condition. Off removed the circuit board, cleaned everything down with the alcohol pad. Put it all back together. It seems to work fine. I’m thinking maybe from a heavy rain storm. Rain got inside there.. Nevertheless, I still have the board I purchased I guess I’ll keep it as a spare. Thanks again
Parts Used:
-
scott from ISLAND PARK, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit condenser won't turn off
Took old part off and replaced after cleaning the coils but it didn't fix it .Now have to figure out what's next.
Parts Used:
-
Lisa from CRESTVIEW, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!