247888702 ((31AH54TI799)(2017)) Craftsman Snow Blower - Overview

Sections of the 247888702

[Viewing 21 of 21]
Keep searches simple, eg. "belt" or "pump".
BRACKET-GDE-CBL-CL – Part Number: 790-03997
BRACKET-GDE-CBL-CL
PartSelect #: PS18484934
Manufacturer #: 790-03997
  No Longer Available
CAM-CLUTCH LOCK – Part Number: 731-04896C
CAM-CLUTCH LOCK
PartSelect #: PS18467027
Manufacturer #: 731-04896C
  No Longer Available
BEARING-BALL – Part Number: 741P0919B
BEARING-BALL
PartSelect #: PS18469896
Manufacturer #: 741P0919B
  No Longer Available
PULLEY-HALF-A 2.76 – Part Number: 756-06563
PULLEY-HALF-A 2.76
PartSelect #: PS18476435
Manufacturer #: 756-06563
  No Longer Available
SOCKET HDLT-LED 15 – Part Number: 925-06095A
SOCKET HDLT-LED 15
PartSelect #: PS18487881
Manufacturer #: 925-06095A
  No Longer Available
SHEAR PINS (3X SNOW) – Part Number: 490-241-C062
SHEAR PINS (3X SNOW)
PartSelect #: PS18445655
Manufacturer #: 490-241-C062
  No Longer Available
AUGER BELT – Part Number: 490-501-C080
AUGER BELT
PartSelect #: PS18445807
Manufacturer #: 490-501-C080
  No Longer Available
CHUTE-UPPER W/LBL – Part Number: 731-04427B
CHUTE-UPPER W/LBL
PartSelect #: PS18466999
Manufacturer #: 731-04427B
  No Longer Available
DRIVE BELT – Part Number: 490-501-C096
DRIVE BELT
PartSelect #: PS18445814
Manufacturer #: 490-501-C096
  No Longer Available
BELT-SNOW THROWER – Part Number: 490-501-Y096
BELT-SNOW THROWER
PartSelect #: PS18445861
Manufacturer #: 490-501-Y096
  No Longer Available

Questions And Answers for 247888702

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 247888702

[Viewing 2 of 2]
Auger will not turn
Fixed by
these parts
Fixing
Show All
Auger / blower won't engage
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The chute rotation assembly was stuck
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part. They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Parts Used:
Gearbox Asm-chut Rota
  • Ralph from SALT LAKE CTY, UT
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!