247288851 ((13AL78ST099)(2011)) Craftsman Lawn Tractor - Overview
Sections of the 247288851
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Muffler-b&s Single
PartSelect #: PS18489379
Manufacturer #: 951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the en...
No Longer Available
Questions And Answers for 247288851
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Parts Used:
-
Laurie from RICHLANDS, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable), Wrench set
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper transmission belt cracked bad
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Parts Used:
-
William from TRIANGLE, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Wrench set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
-
Randall from GALLIPOLIS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
6 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!