I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Removed battery, then battery hanger brackets. Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley. put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal. Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring. cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
