247250010 Craftsman Engine - Overview
Sections of the 247250010
[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
WHEEL ASM-CASTER
PartSelect #: PS18453857
Manufacturer #: 634-04746
This is an OEM replacement part for Craftsman lawn tractors. The wheels allow you to easily propel your mower from place to place. This part is made from plastic and is sold individually. Before insta...
No Longer Available
Questions And Answers for 247250010
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelly
April 18, 2023
motor starts at very high rpm and will not throttle down
For model number 247250010
Hi Kelly, thank you for reaching out. According to our research, we would recommend you check the governor, which controls the engine speed. Adjust the governor spring, part number PS9139888, and make sure that this spring is not too tight or too loose; keep it in an idle position. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
1 deck belt cover fell off and the other rusted and loosening
Removed the retaining screws on both belt covers and replaced them with the new ones i purchased.
Parts Used:
-
J. Alonzo from TULALIP, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt guards broken
Replaced belt guards. Bended in center plates to keep the belts from slipping off. Works like a charm
Parts Used:
-
Jerry from GRAND BAY, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
-
Randall from GALLIPOLIS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
5 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!