247204450 Craftsman Lawn Tractor - Overview

Models starting with 247204450

Keep searches simple, eg. "belt" or "pump".
MODULE-IGN SWITCH – Part Number: 725-13425
MODULE-IGN SWITCH
PartSelect #: PS18466331
Manufacturer #: 725-13425
  No Longer Available
Deck Spindle Housing – Part Number: 719-07293-M
Deck Spindle Housing
PartSelect #: PS18465279
Manufacturer #: 719-07293-M
  No Longer Available
LENS-CPX GRILLE RH – Part Number: 731P09757A
LENS-CPX GRILLE RH
PartSelect #: PS18468319
Manufacturer #: 731P09757A
  No Longer Available
GEAR-STRG SEGMENT – Part Number: 717-05156C
GEAR-STRG SEGMENT
PartSelect #: PS18464984
Manufacturer #: 717-05156C
  No Longer Available
ROD ASM-STRG TIE – Part Number: 947-05058A
ROD ASM-STRG TIE
PartSelect #: PS18489189
Manufacturer #: 947-05058A
  No Longer Available
SVC KIT-HYDRO TRANS – Part Number: 753-08600
SVC KIT-HYDRO TRANS
PartSelect #: PS18475581
Manufacturer #: 753-08600
  No Longer Available
PLT-STEERING MTG – Part Number: 783-08386B-0637
PLT-STEERING MTG
PartSelect #: PS18483317
Manufacturer #: 783-08386B-0637
  No Longer Available
BLADE REMOVAL TOOL – Part Number: 490-850-0005
BLADE REMOVAL TOOL
PartSelect #: PS19244511
Manufacturer #: 490-850-0005
  No Longer Available
BEARING-BALL – Part Number: 741P0919B
BEARING-BALL
PartSelect #: PS18469896
Manufacturer #: 741P0919B
  No Longer Available
WHL-COMP 16X6.5X8 – Part Number: 634Z05180-4028
WHL-COMP 16X6.5X8
PartSelect #: PS18454269
Manufacturer #: 634Z05180-4028
  No Longer Available
Decal – Part Number: 777D20767
Decal
PartSelect #: PS12491951
Manufacturer #: 777D20767
  No Longer Available
TANK ASM-FUEL 3 GA – Part Number: 651P08850
TANK ASM-FUEL 3 GA
PartSelect #: PS18455304
Manufacturer #: 651P08850
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Lug bolt
Removed broken lug bolt using a hammer and drift punch, replaced new lug bolt using a socket and ratchet wrench,,
Parts Used:
Stud, Rib Neck, 7/16-14 x 1.6
  • Ned from VALLEY MILLS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clutch harness had a broken wire. So needed a new harnesd
Jacked up front of the mower …went to pto clutch unplugged old harness has 2 quick disconnects and plugged in the new harness in the the connectors and started mower and it worked great. Took less than 5 minutes
Parts Used:
Harness-clutch 11
  • Dean from DETROIT LAKES, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
The repair was a very easy.
Parts Used:
Shaft-blade Spindl
  • Randall from GALLIPOLIS, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!