It is a genuine item that is supplied by the original equipment manufacturer for use with lawn mowers. The retainer plate is designed to secure the steering gear assembly. It provides an identical rep...
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Removed battery, then battery hanger brackets. Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley. put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal. Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring. cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
