247203722 Craftsman Lawn Tractor - Overview

Sections of the 247203722

[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Steering Block – Part Number: 748-04278
Steering Block
PartSelect #: PS11983937
Manufacturer #: 748-04278
  No Longer Available
LENS-CPX GRILLE RH – Part Number: 731P09757A
LENS-CPX GRILLE RH
PartSelect #: PS18468319
Manufacturer #: 731P09757A
  No Longer Available
Retainer Plate – Part Number: 783P08577A
Retainer Plate
PartSelect #: PS18483778
Manufacturer #: 783P08577A
It is a genuine item that is supplied by the original equipment manufacturer for use with lawn mowers. The retainer plate is designed to secure the steering gear assembly. It provides an identical rep...
  No Longer Available
BRKT-VARIABLE AUTO – Part Number: 783-06587A
BRKT-VARIABLE AUTO
PartSelect #: PS18483047
Manufacturer #: 783-06587A
  No Longer Available
WIRE HARNESS (W/RMC, W/O AMM) – Part Number: 725P04432P
WIRE HARNESS (W/RMC, W/O AMM)
PartSelect #: PS18466570
Manufacturer #: 725P04432P
  No Longer Available
TANK ASM-FUEL 1.36 – Part Number: 651P08849
TANK ASM-FUEL 1.36
PartSelect #: PS18455303
Manufacturer #: 651P08849
  No Longer Available
Tap screw, 1/4-20 x .5 – Part Number: 710-5070A
Tap screw, 1/4-20 x .5
PartSelect #: PS12493917
Manufacturer #: 710-5070A
  No Longer Available
Craftsman smart lawn connect kit – Part Number: 490-900-S068
Craftsman smart lawn connect kit
PartSelect #: PS12453982
Manufacturer #: 490-900-S068
  No Longer Available
LVR ASM-SHIFT – Part Number: 647-04266B
LVR ASM-SHIFT
PartSelect #: PS18454484
Manufacturer #: 647-04266B
  No Longer Available
Shoulder spacer, 1.00 x .38 x .38 – Part Number: 738-0372AB
Shoulder spacer, 1.00 x .38 x .38
PartSelect #: PS12494188
Manufacturer #: 738-0372AB
  No Longer Available
Craftsman smart lawn connect kit – Part Number: 725-07008
Craftsman smart lawn connect kit
PartSelect #: PS12474475
Manufacturer #: 725-07008
  No Longer Available
FRM ASM:RDR – Part Number: 683-05139A-0637
FRM ASM:RDR
PartSelect #: PS18456906
Manufacturer #: 683-05139A-0637
  No Longer Available

Questions And Answers for 247203722

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rowena
February 22, 2026
Location of spark plug?
For model number 247203722
PartSelect logo
Hello Rowena, Thank you for writing in. The spark plug is located on the engine. On the side of the cylinder head Threaded directly into the top portion of the combustion chamber Positioned near the front of the engine (muffler/exhaust side on most configurations) You’ll see a single black rubber spark plug boot attached to the ignition coil wire. Pull the boot straight off to access the spark plug underneath. We hope this helps.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 247203722

[Viewing 1 of 1]
Deck blades will not turn
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Parts Used:
Sleeve-oil Drain
  • Laurie from RICHLANDS, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set, Wrench (Adjustable), Wrench set
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper transmission belt cracked bad
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Parts Used:
V-Belt
  • William from TRIANGLE, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
The repair was a very easy.
Parts Used:
Shaft-blade Spindl
  • Randall from GALLIPOLIS, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
5 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!