1812-1 Craftsman Generator - Overview
Sections of the 1812-1
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Questions And Answers for 1812-1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Had generator repaired and the lost the handle
Removed the old bracket from the generator and installed new bracket and handle using the same bolts.
Parts Used:
-
Melinda from Port Saint Lucie, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
-
Alberto from PALMETTO BAY, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
11 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!