143974036 Craftsman Engine - Overview

Sections of the 143974036

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Washer – Part Number: 28277
Washer
PartSelect #: PS9934400
Manufacturer #: 28277
  No Longer Available
Oil Pump Assembly – Part Number: 29914
Oil Pump Assembly
PartSelect #: PS9935726
Manufacturer #: 29914
  No Longer Available
Belleville Washer – Part Number: 650815
Belleville Washer
PartSelect #: PS9988814
Manufacturer #: 650815
  No Longer Available
Dust Seal Washer – Part Number: 631184
Dust Seal Washer
PartSelect #: PS9987011
Manufacturer #: 631184
  No Longer Available
O-ring – Part Number: 35499
O-ring
PartSelect #: PS9946720
Manufacturer #: 35499
  No Longer Available
Screw – Part Number: 6021A
Screw
PartSelect #: PS9984857
Manufacturer #: 6021A
  No Longer Available
Gasket – Part Number: 36475A
Gasket
PartSelect #: PS12445892
Manufacturer #: 36475A
  No Longer Available
Nut – Part Number: 632746
Nut
PartSelect #: PS11974475
Manufacturer #: 632746
  No Longer Available
Nozzle – Part Number: 632745
Nozzle
PartSelect #: PS9987256
Manufacturer #: 632745
  No Longer Available
Piston Assembly – Part Number: 32549B
Piston Assembly
PartSelect #: PS9943192
Manufacturer #: 32549B
  No Longer Available
Screw (1/4-20x2-9/32) – Part Number: 650988
Screw (1/4-20x2-9/32)
PartSelect #: PS9988905
Manufacturer #: 650988
This manufacturer-approved screw is supplied directly from the original manufacturer. It is specially made for use with a variety of lawn and garden equipment. The screw is commonly utilized to secure...
  No Longer Available
Piston – Part Number: 34516
Piston
PartSelect #: PS9945665
Manufacturer #: 34516
  No Longer Available

Questions And Answers for 143974036

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaking gasoline from carburetor bowl. No air filter
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After about 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Parts Used:
Screw, 10-32x49/64" Trimmer Air Cleaner Gasket Air Cleaner Cover
  • Richard from Geneva, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!