143963501 Craftsman Engine - Overview

Sections of the 143963501

[Viewing 4 of 4]
Carburetor 632705 (71/143) Diagram and Parts List for Craftsman Engine
Carburetor 632705 (71/143)
Engine Diagram and Parts List for Craftsman Engine
Engine
Rewind Starter Diagram and Parts List for Craftsman Engine
Rewind Starter
Starter 590738 Diagram and Parts List for Craftsman Engine
Starter 590738
Keep searches simple, eg. "belt" or "pump".
Washer – Part Number: 28277
Washer
PartSelect #: PS9934400
Manufacturer #: 28277
  No Longer Available
Breather Body – Part Number: 27666
Breather Body
PartSelect #: PS9932836
Manufacturer #: 27666
  No Longer Available
Heat Baffle – Part Number: 33344
Heat Baffle
PartSelect #: PS9944110
Manufacturer #: 33344
  No Longer Available
Washer – Part Number: 590600
Washer
PartSelect #: PS9983138
Manufacturer #: 590600
  No Longer Available
Knob – Part Number: 32410
Knob
PartSelect #: PS9943122
Manufacturer #: 32410
  No Longer Available
Retainer – Part Number: 590696
Retainer
PartSelect #: PS9983218
Manufacturer #: 590696
  No Longer Available
Screw, 8-32 X 1/2" – Part Number: 650139
Screw, 8-32 X 1/2"
PartSelect #: PS9988624
Manufacturer #: 650139
  No Longer Available
Belleville Washer – Part Number: 650815
Belleville Washer
PartSelect #: PS9988814
Manufacturer #: 650815
  No Longer Available
Dust Seal Washer – Part Number: 631184
Dust Seal Washer
PartSelect #: PS9987011
Manufacturer #: 631184
  No Longer Available
O-ring – Part Number: 35499
O-ring
PartSelect #: PS9946720
Manufacturer #: 35499
  No Longer Available
Clip – Part Number: 35539
Clip
PartSelect #: PS9946727
Manufacturer #: 35539
  No Longer Available
Screw – Part Number: 6021A
Screw
PartSelect #: PS9984857
Manufacturer #: 6021A
  No Longer Available
Back to Top
View More

Questions And Answers for 143963501

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaking gasoline from carburetor bowl. No air filter
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After about 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Parts Used:
Screw, 10-32x49/64" Trimmer Air Cleaner Gasket Air Cleaner Cover
  • Richard from Geneva, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More