11094518401 Kenmore Washer - Overview
Sections of the 11094518401
[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Dishwasher Faucet Adapter
PartSelect #: PS11751238
Manufacturer #: WPW10254672
Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.
$69.03
In Stock
Washer Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.80
In Stock
Washer Snubber Strap
PartSelect #: PS11742149
Manufacturer #: WP3967051
Sold individually.
$12.62
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.07
In Stock
Idler Shaft Retaining Ring
PartSelect #: PS11741848
Manufacturer #: WP354987
This idler shaft retaining ring is well under an inch long and is made of metal.
$18.22
In Stock
Lid Strike
PartSelect #: PS11741871
Manufacturer #: WP358684
This part is used to activate the lid switch when the lid opens/closes.
$14.02
In Stock
Inlet Hose - 5 FT
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$27.29
In Stock
Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$11.80
In Stock
Drain Hose with Clamp
PartSelect #: PS334596
Manufacturer #: 285664
Used to drain water.
$61.54
In Stock
Washer Hose Clamp
PartSelect #: PS11743289
Manufacturer #: WP616099
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$12.43
In Stock
Washer Hose Clamp
PartSelect #: PS11741854
Manufacturer #: WP356138
This clamp helps to prevent leaking by holding the end of water hose in place.
$13.73
In Stock
Water Inlet Hose Washer
PartSelect #: PS11738697
Manufacturer #: WP16123
Sold Individually. Order quantity needed.
$10.09
Special Order
Questions And Answers for 11094518401
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 11094518401
[Viewing 6 of 6]Leaking
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.
I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!
Parts Used:
-
Ronald from Chebanse, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
28 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking drain hose
First I removed hose from drain, next I loosened the clamp at the drain hose connection at the washer. Removed hose. Have rags/towels as there is some residual water that will spill out of the washer. Reinstall in reverse.
Parts Used:
-
Steve from Cypress, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking Water
Tipped the washer over to find where the leak was coming from. After finding it was the hose between the tub and drain fitting on the back of the machine I stood the washer back up and removed the access hatch cover on the back of the machine. Two spring clamps held the hose on which I removed with channel lock pliers. Installation was a bit more difficult because the clamps like to slip off the pliers. They make special pliers for these type of clamps but I don't have a pair. I was able to easily get one clamp on but after wasting a few minutes with the other one I decided to just use an automotive type worm drive hose clamp for the upper clamp, rather than struggle with the original wire style clamp.
Parts Used:
-
Jason from Wrentham, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!