This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
First I removed hose from drain, next I loosened the clamp at the drain hose connection at the washer. Removed hose. Have rags/towels as there is some residual water that will spill out of the washer. Reinstall in reverse.
Tipped the washer over to find where the leak was coming from. After finding it was the hose between the tub and drain fitting on the back of the machine I stood the washer back up and removed the access hatch cover on the back of the machine. Two spring clamps held the hose on which I removed with channel lock pliers. Installation was a bit more difficult because the clamps like to slip off the pliers. They make special pliers for these type of clamps but I don't have a pair. I was able to easily get one clamp on but after wasting a few minutes with the other one I decided to just use an automotive type worm drive hose clamp for the upper clamp, rather than struggle with the original wire style clamp.
