This lid lock assembly is designed for use in various top-load washing machines and serves as a critical safety feature. Located beneath the washer lid, it includes the locking mechanism and wiring ha...
Ensure your washing machine operates safely and reliably with this replacement lid lock latch. Positioned to secure the door or lid during active cycles, it prevents accidental openings and supports p...
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up th...
Your washing machine is a crucial part of your daily routine, isn't it? So when the lid isn't opening or closing properly, we understand that it can create a lot of inconvenience for you. Don't worry,...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Walter
November 28, 2019
Won't agitate
For model number 11029133410
Hello Walter, Thank you for the question. If the washer won't agitate the Shift Actuator/slider might be worn or damaged and need to be replaced, PartSelect Number PS10060062. Hope this helps!
Hello Terry, Thank you for your inquiry. We have researched your model and the DRN code means a drain error or your washer is not draining properly. We first recommend checking your drain hoses for obstructions or kinks. If there are no obstructions, then we recommend checking the drain pump, part# PS11738156. Good luck with your repair.
Washer makes a loud roaring noise on the spin mode, like a jet engine ready for take off. Would this be a transmission issue?
For model number 11029133410
Hello Shane, thank you for getting in touch. A constant roaring or grinding noise that doesn’t change with load is caused by worn out or damaged bearings. The bearing for your washer comes with the gear case assembly, part number PS12741641. Replace it to fix the issue. We hope this helps.
I watched a YouTube video first. Followed instructions exactly and had washer going in 30 minutes!!!! Part that I ordered was an exact fit! Thanks to partselect.com!
UNPLUG WASHER FROM WALL PLUG Watch u tube on how to remove top and also cover on top circuit compartment First find the service book taped inside front. PLUGand read to read codes call up the error codes flashing the code indicated a defective lid latch.UNPUG WASHER went through testing the switch one of the contacts was defective and intermittent. UNPUG WASHER unpug J connect from circuit board remove wiring and connect from lid new wiring harness goes back same as old one and mount new lid switch. done
