This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This lid lock helps keep your washer running safely and smoothly. It locks the lid during cycles so the machine won’t spin or wash with the lid open. If your washer won’t start or the lid won’t close ...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
This suspension rod kit, also known as a suspension damper kit, is designed to support the inner tub of your washing machine and reduce excessive vibration during operation. The kit includes four susp...
Washing Machine Drain Hose Extension Kit *4 foot - includes hose, 2 clamps and hose connector.
$62.62
In Stock
Questions And Answers for 11028102310
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Helaine
November 30, 2019
This washer really smells. I see residue building up around the outer ring of the tub. I use the recommended washing machine cleaner. Can we take it apart and see where the smell is coming from. Thank you.
For model number 11028102310
Hi Helaine, you can watch a video we have that will will shoe you how to take a back panel off here: https://www.youtube.com/watch?v=9qpUhb1zBYs. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Laurie
March 19, 2020
Washer has sd code and will not spin
For model number 11028102310
Good Day Laurie. Thank you for your question in regards to your unit (Model Number 11028102310). Based on our research, the SD error code indicates suds have been detected in your washer. We recommend that you use a HE low sudsing detergent. This code can also indicate that there are too much soap or the wrong kind of soap was used in the washer (we suggest reviewing the owner's manual for more information in regards to this). Finally, this code could be an indication that the drain pump is restricted or the drain hose is kinked. We hope this helps! Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Moises
October 16, 2022
I have a Kenmore Series700
TYPE:580
MOD 110.28102310
SER C41770918
I put it in a light load normal spin cold water normal soil level it did successfully go through prewash cycle and also wash cycle, but got stuck in Rinse cycle with 27 min remaining and had a code LD
I unplugged washer for 5-10 min and tried the drain/spin cycle to drain water and doesn’t let me use any options until disconnected
For model number 11028102310
Hello Moises, thank you for a very interesting question. We have researched your model and found that the issue is probably with the Drain Hose. Check to make sure the drain hose isn’t clogged. If that does not take care of the issue, then the problem is most likely to be related to the Drain Pump, part number PS11754363. If you require assistance to place an order, please contact customer service. We hope that helps!
It is not the too much suds thing. It is the part that makes the drum spin. It agitates but fails the spin cycle. The drum sits on the piece that locks into the drum to make it spin. I need that part only
For model number 11028102310
Hi Michael, thank you for reaching out. The part you are looking for is the drive shaft. It is not available separately and is only available as a part of the tub seal and bearing kit, part number PS3503261. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
It keeps giving a uL code, is there a belt or something that may have come loose? The tub is moves a lot more now. The only way it does not give the code is if it is empty. I didn't see a belt on the drawings, but the tub is very unstable
For model number 11028102310
Hello Paul, thank you for contacting us. If uL appears in the display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press the start button. If the problem persists, you may need to replace the suspension rod kit, part number PS2355518. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Followed video from you tube. Man made it look very easy. Not! Hole that lock has to come through in back was very tricky. Also, DO NOT THROW OUT OLD PART UNTIL NEW ONE IS INSTALLED. The reason for that is there is a CLIP at the end of the old part that is needed to attach new part to wire section in control panel. NO WHERE is it mentioned at you got the clip from the old part. Luckily we saved it. Without that clip, you are screwed.
