Dryer Pumps

Dryer Washing Machine Drain Pump

★★★★★

★★★★★

109 Reviews

The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.

Dryer Drain Pump - 120v 60 Hz.

★★★★★

★★★★★

27 Reviews

The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

Dryer Pump Filter

★★★★★

★★★★★

3 Reviews

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Dryer Drain Pump - 120v 60hz This durable drain pump is designed to efficiently remove water from the washer tub during drain and spin cycles, ensuring smooth operation and preventing water buildup. Made from high-quality ABS plastic for impact and corrosion resistance, it provides long-lasting reliability. Common signs that your pump may need replacement include slow or incomplete draining, water pooling around the machine, or error codes related to drainage. The pump is typically located at the bottom of the washer for easy access. Installation is simple—always disconnect power, remove the old pump, and secure the new one in place.

Dryer Pump

★★★★★

★★★★★

3 Reviews

If your Bosch dryer isn’t draining properly, this pump might be the solution. It helps remove water from inside the dryer so your clothes dry efficiently. Built to fit select Bosch, Thermador, and Gaggenau models, it’s a reliable replacement for a worn-out or faulty pump. Just make sure to unplug your dryer before installing.

Dryer Heat Pump Assembly This OEM dryer drain pump removes condensate water to maintain drying efficiency. If clogged or faulty, replacing it ensures proper operation. Unplug the dryer before installation.

Dryer Drain Pump Assembly This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operation. Replacing a failing pump can resolve drainage issues or abnormal noise.

Dryer Drain Pump This drain pump helps your ice maker stay dry and work properly by clearing out extra water from melting ice. It keeps water from pooling inside or leaking onto the floor, which can cause problems. If your ice maker isn’t working right or you’re seeing water where it shouldn’t be, replacing the pump could be the fix. It’s easy to install and built to last—just make sure it fits your model.

Dryer Pump If your dryer isn’t drying well or seems to be holding moisture, this drain pump might be the fix. It pulls water out of the drum and sends it to the drain, helping your dryer work more efficiently. It’s built to last and helps prevent clogs and water buildup. Swapping it out can make a big difference in how your dryer performs. Just be sure it’s the right fit for your model before ordering.

Dryer Pump If your washer or dryer isn’t draining properly, this pump might be the fix. It helps remove water during the cycle so your appliance works like it should. It’s built to last and easy to install—just make sure to turn off the power first. Check your model number before ordering to make sure it fits.