Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Douglas Donald C - June 16, 2023
Verified Purchase
Control Board arrived very fast and is identical to the unit in my washer
My washer was acting like it had Alzheimer's so I was pretty sure that the Control Board was acting up so I ordered a new one from PartSelect. It arrived very fast and it looks identical to the original. I can still get the washer to work as it is so I haven't been forced to install the new board yet, but when I do ,I will see if I can amend this review with an update
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
February 3, 2018
How do test the electronic control
For model number RTW4640YQ1
Hello Jerry, Thank you for your inquiry. First check all the connections to be board to make sure they are secure and no visual damage. Next, inspect the board itself for any visual damage. You can test it with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 8, 2023
When washer is put into diagnostic mode, on the extra heavy and rinse/spin cycles I am getting an F7-E error code (alternates between fill, rinse,final spin,cycle complete lights illuminate- all lights out) on all other cycle selections only the fill indicator flashes on and off. Would this indicate a control board issue?
For model number RTW4640YQ1
Hi Charles, thank you for reaching out. The F7-E1 error code indicates that the motor can not achieve the correct speed for the cycle selection. Try resetting the machine by unplugging and re-plugging the power cord to the wall outlet. Restart the cycle. If the problem persists, we would recommend checking the gear case, part number PS16220913. It drives the agitator and spins the basket in the washer. You may need to replace it to fix the issue. We hope that helps!
