Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Knob had broken off from pressure switch
Very simple took control board off and unplugged hose and wire twisted it out and just put new part in
Other Parts Used:
Ashley from DAYTONA BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic tab that the dial knob slides on broke off the switch.
The pressure switch came out easily however I had to get the control panel to lay flat to slide the new switch in place. I finally determined that you have to slide the panel to the left to get it out of the slots and thus lay it flat on the washer lid. Wish the washer instructions told you that. Part fit perfectly and is easier to change the water level than the original part. I think the original part was rubbing and that finally broke the tab.
Other Parts Used:
Arnold from OSWEGO, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
May 7, 2018
I need to replace the switch labeled as "load size" as well as its knob. What part or parts are required?
For model number GTWN2800DOWW
Hi Kevin,
Thank you for your question. I believe you are referring to the water level pressure switch. The part number listed under your model number for the water level pressure switch is PS3487295. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
March 15, 2023
I have a rinse cycle that doesn't fill up to the main wash level.
Replaced the Main switch.
Is this pressure switch the culprit?
Blew into the tube to clear any obstruction.
And blew into the switch heard a click. Is this a single stage or double? Cause I only heard one click.
For model number gtwn2800d1ww
Hi Doug, thank you for contacting us. According to research, the issue is likely with the pressure switch, part number PS3487295. If this is fine, probably the water inlet valve, part number PS11721803, is causing the issue. We suggest checking the valve and replacing it if needed. A dual-stage pressure switch is designed for use in applications where two separate pressure operations must be controlled by a single pressure monitoring device. A single-stage pressure switch is designed for use in applications where one pressure operation is controlled by a single pressure monitoring device. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
