Whirlpool 341241 - Multi Rib Belt - 92-1/4" | PartSelect.ca
Multi Rib Belt - 92-1/4" – Part Number: 341241
Multi Rib Belt - 92-1/4" – Part Number: 341241 Multi Rib Belt - 92-1/4" – Part Number: 341241 Multi Rib Belt - 92-1/4" – Part Number: 341241 https://partselectca.azureedge.net/Schematics/Maytag/UTGT4VNQ.gif

Multi Rib Belt - 92-1/4"

24 Reviews

Your Price

CAD$19.72

PartSelect Number PS346995
Manufacturer Part Number 341241
Manufactured by Whirlpool

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Norge, Roper, Maytag, Magic Chef, Crosley, Admiral, Estate, Amana, Inglis, Jenn-Air, Hoover.

This part works with the following products: Dryer.

This part fixes the following symptoms: Will not tumble | Noisy | Will Not Start | No heat or not enough heat

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
(1)
PartSelect: PS11743765
This part provides the tension for a multi-ribbed belt and helps the belt to rotate the drum. This arm attaches to the idler pulley wheel.
$17.93
In Stock
(14)
PartSelect: PS373087
NOTE: This kit is for 29" wide dryers built in 1965 or later. Please verify model # before ordering as may not work for all models. This kit comes with one multi-rib belt, two drum support rollers, one idler pulley, fo...
$34.38
In Stock
Questions & Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 353 reviews What's this?
26 of 44 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Customer:
Chris from Worcester, MA
Motor tried, but could not turn drum
First, I unplugged it and pulled it away from the wall. Then I pryed the front of the top up. It is scary to apply that much force, but the clips did not break. It opens like a car hood. Then I removed the two sheet metal screws that hold the front to the sides. Don't forget to unplug and unclip the door switch wires. Then I lifted the front off the bottom clips. Be sure to hold the drum up when you do this. Three hands will make it easier. Then remove the drum and belt. The belt tensioner will fall off, but that is ok.

I thought the problem would turn out to be the motor, but instead it was the front seal for the drum. It is felt and had broken. It folded under itself and was jamming the drum to the point that the motor couldn't turn it.

I replaced the felt seal, which attaches to the front cover with three clips and also replaced the plastic guides, which clip to the drum. Both were easy to do. I had replaced the rear drum seal a few years ago and so it was ok, otherwise I would recommend doing that too.

While I had it apart, I opened up the back and cleaned out all the lint in the fan housing. I had replaced the heater element, thermal switch and fuse a few years ago, so they were fine.

I also replaced the mosture sensor, just because it only cost $11. I bought a new lint filter, because it had holes in it after 20 years. I replaced the belt, because it was only $10. I replaced the lint filter cover and front door handle, because they had yellowed. I will warn you about the front door handle. It was a bear. I finally had to take the door apart to get the little plastic clip to seat correctly.

Then I put it all back together, which again is easier with 3 hands. Holding up the drum and putting the front cover on the lower clips can be a bit tricky alone. Also, be sure to rotate the drum to make sure the rear seal is not folded under and the front seal is seated correclty.

I fired it up and it ran great, except for the constant whistling. I had wondered what the little clear plastic box in the back did. Turns out it is the lint filter is full whistle warning thing. I took the back off again and found a wire was resting on the flapper door of the box and holding it in the wrong postion. By the way, it is a really irritating sound after the first few minutes. I moved the wire and it works great.

I worked slowly and it went well and was not hard.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 23 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Customer:
Ray from Raphine, VA
Dryer not getting clothes dry in one cycle
Raise the top of the dryer. This exposed the elements in the back. Removed old elements,paying attention to where the wires go.
Installed new elements, hooked the wires up, and I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 18 people found these instructions helpful
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
Customer:
Terri from Palmdale, CA
Replaced old belt & the igniter
I removed the 2 screws that hold the ignighter & cover in place...unpluged the wire...replaced it with the new ignighter...thats when I found out that it was easier to take off than to put on...but I got it back into place...replaced the 2 screws...put the new belt on the drum...fitted it around the moter...pulled the wheel spring back to get it on tight...made sure the drum was fitted around the wheels...checked the tension...plugged in the wire for the ignighter...tested to see if the ignighter glowed...it did...I but the door back on the dryer...and it works...i thank my father for showing me how to work on machines...instead of letting me play with my dolls...thank you Parts select for getting my order to me in great condition & record time...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 24 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Customer:
Christopher from bellerose, NY
Motor would not turn
1) Removed top of dryer
2) removed belt and drum
3) removed front of dryer
4) popped clips holding down motor
5) unscrewed rear fan from motor (by exposing and holding fan)
6) changed motor
7) changed support rollers and idler pully
8) reassemled dryer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 18 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Customer:
Joseph from Prospect Park, PA
Loud banging noise when running dryer
Found one of the two drum support rollers was badly worn. Found Partselect.com, found my parts in less then 2 mins. Figured that I was in there so I should just replace the belt so I got one of those also. Parts arrived in 3 days dryer as good as new in 20 mins.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Customer Reviews
Average Rating:
24 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    21
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:

Model Cross Reference

Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
110.6085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
110.7080299
Dryer - Kenmore Dryer Model 110.7080299 (1107080299, 110 7080299) Parts
Kenmore
110.765340284414694
Dryer - Kenmore Dryer Model 110.765340284414694 (110765340284414694, 110 765340284414694) Parts
Kenmore
110.76702690
Dryer - Kenmore Dryer Model 110.76702690 (11076702690, 110 76702690) Parts
Kenmore
110.76862692
Dryer - Kenmore Dryer Model 110.76862692 (11076862692, 110 76862692) Parts
Kenmore
110.77834792
Dryer - Kenmore Dryer Model 110.77834792 (11077834792, 110 77834792) Parts
Kenmore
110.796228
Dryer - Kenmore Dryer Model 110.796228 (110796228, 110 796228) Parts
Kenmore
110.97263100
Dryer - Kenmore Dryer Model 110.97263100 (11097263100, 110 97263100) Parts
Kenmore
110.97263800
Dryer - Kenmore Dryer Model 110.97263800 (11097263800, 110 97263800) Parts
Kenmore
110.97561420
Dryer - Kenmore Dryer Model 110.97561420 (11097561420, 110 97561420) Parts
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
11060172000
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060202990
Dryer
Kenmore
11060212990
Dryer
Kenmore
11060222510
Dryer - DRYER
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060232000
Dryer
Kenmore
11060232001
Dryer
Kenmore
11060232002
Dryer