Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dorothy C - August 10, 2024
Verified Purchase
Easy repair, good part
The part was easy to install. The box was battered upon delivery and one of the small pieces was broken. Luckily that part was still in good condition from the original machine.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top portion of the agitator finally quit working. Cams that engage the action wore down.
Repair was simple, after finding the correct part from Partselect. Exact match. Old part out with removal of one bolt, new agitator assembly installed in five minutes. Works great and saved me from buying a new washer. Cost of repair about $80.00, replace washing machine, about $600.00.
Other Parts Used:
Edwin from Plainfield, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
34 of 39 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top part of the Agitator was no longer working.
The repair was very easy. The only hard part was due to the age of the machine the cap covering the agitator assembly was stuck on the top.I had to use a very large pipe wrench to loosen it. Other than that the whole repair went very smooth. You will need an extension with the socket wrench in order to reach the screw holding down the agitator.I was very impressed with the service from Parts Select. I received my part very fast and it included everything I needed to complete the job.
Other Parts Used:
Ron from Germantown, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
15 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer's Agitator wasn't working
Basic replacement so easy my nine yr old daughter did the needed repair we watched the video on your web site Way to go Alexis . Ten minutes later all done ! Probably saved a few hundred dollars or more, no service calls or no need to replaced our beloved washer (Cira 1994) they really don't make them like this anymore, will use your company again if needed Thanks !!!
Had to clean debris on metal drive shaft splines in orderv forvnew lower agiitator to seat properly. Install upper agitator and parts then reinsert bolt in upper agitator. Install cap and o-ring, fabric softner dispenser and test for proper operation.
I already had the old agitator out, so when I got the new one I put it in the tub. You have to spin it a little so it seats properly. I then tightened the bolt with a 7/16” socket and my wife was washing a load within 15 minutes
Other Parts Used:
Thomas from MENTOR, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic teeth on the inside of the large agitator stripped out.
I needed an air impact wrench to remove the single nut. It was stuck on there. Once the Nut. Was removed it was an easy repair. Perfect fit! Just pop it on the shaft and replace the bolt. Since I had my air tools out already I gave it a couple of dugga duggas.
Other Parts Used:
David from NICHOLASVILLE, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
August 3, 2018
What is the part number for liquid fabric dispencer? All i see is that part has to be ordered. I need the part number please.
For model number NTW4516FW2
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect #: PS1488027. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
August 2, 2021
The bucket of the dog's harness is bought under the agitator of the washer. How do i loosen the agitator to lift it up to remove the harness buckle from under the agitator?
For model number NTW4516FW3
Hello Tom, Thank you for your inquiry. You need to start by removing the cap, the cap barrier, and use a socket wrench to remove the bolt from the agitator. You should then be able to pull the agitator out. We have included a link to our video for a similar agitator to assist you with removing the agitator. Hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
January 21, 2018
What's all in the agitator kit 285565?
Hi Eric,
Thank you for your question. The kit includes the bottom base, the agitator dogs, the cap and the agitator mover. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jamal
November 20, 2018
My washer is not agitating . I replaced the agitator dog & motor drive coupling. Still is not agitating & make noise during the regular wash. Please help
For model number ETW4400WQ0
Hi Jamal, thank you for your question. There are a few parts that you will have to check to see if they need to be replaced. You should check your thrust spacer and agitator cam bearing. Both of those parts are in the agitator repair kit. You may also want to take a look at your agitator cams, your gearcase, and then finally your motor itself. I hope that helps. Good luck with your repair.
I just need the fabric softener dispenser not the entire agitator. This is a new washer. Do you have a part number for just the dispenser
Hello Chris, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect #: PS1488027. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
December 22, 2019
Good day. Could you please tell me the part number for the softener dispenser accessory for this model washer? Thank you.
For model number ITW4871FW2
Hello Robert and thank you for writing.
Softener dispenser. This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS11749935 Good luck with your repair.
The agitate won't turn while washing but the bottom section is turning. Would the agitator kit would be all I should need for this. Washer runs fine does a great job just now the the top agitator won't turn?
For model number LSR8433KQO
Hello Leroy, thank you for reaching out. We have researched your model and would recommend checking the following parts to fix your issue: agitator directional cogs, part number PS388034, agitator repair kit, part number PS334650, drive motor coupling, part number PS1485646, and upper agitator, part number PS11741159. Please reach out to customer service if you need help placing an order. Glad to be of help!
Just wanted to know if this would work for an Amana washer.
Serial number
C91630105
For model number NTW4516FW3
Hello Heidi, Thank you for your inquiry. We confirm that this part will fit your model. We hope this helps.
Was this helpful?
Thank you for voting!
David
May 31, 2023
Looking for ‘dust cover’ part number in agitator assembly. Exploded parts diagram it’s items 2 and 3
For model number 110.25852400
Hi David, thank you for contacting us. According to our research, your model does not include a separate agitator cap barrier and seal. These parts come with the fabric softener dispenser, part number PS11746095, that is present on the top of the agitator. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service!
Hi Ruby, thank you for getting in touch. Based on our understanding of the issue, we would suggest you tighten the bolt at the bottom of the agitator. When the bolt is loose, it causes the agitator to wobble. If this still does not resolve the issue, then we would suggest checking the directional cogs, part number PS388034, to fix the issue. We hope this solves your problem!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS334557
Manufacturer Part Number: 285565
