OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
About this fix
Common problems and models this part fixes.
Really Easy
Less than 15 mins
Rated by verified customers
What this part fixes:
Will Not Start
Works with the following products:
Washer
Part# WH12X10350 replaces these:
AP3995138, 1264501, WH12X10350
Customer Reviews
Real ratings from other people who bought this part.
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Out of 5
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Justin W - March 29, 2025
Verified Purchase
Perfect fit
Part was new and fit perfectly
★★★★★
★★★★★
Anthony M - October 7, 2021
Verified Purchase
The right part
This is the exact part for our wash machine, and works just like new again, thku.
Prev
1
Next
Repair Tips
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
Really Easy
Less than 15 mins
Average repair rating from 2 real customers like you
Sort by:
Prev
1
Next
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Replace Timer Module
54 of 60 peoplefound this instruction helpful.
Michael from Snellville, GA
Really Easy
15 - 30 mins
Pliers, Screw drivers, Socket set
Remove the knob. This is the hardest part. To remove the knob, unplug the washer and pull the unit out so you can get to the back. Stand on the right side of the machine and pull the knob out. It is retained by a nylon clip. Take a small flathead screw driver and use it to push the clip up from the open ended side. Not much force is
... Read more required. It will pop right up. The clip has a hook on one side so if you try to remove it with needle nose pliers (like I did the first time) you will bend the trim on the knob and likely break the clip.
Once the knob is off, remove the dial with the pointer on it and set it aside.
With this done, remove the three hex screws on the back of the control panel. Then lift the plastic control panel up, then forward. This will allow you to lay the control panel on the top of the machine.
Remove the wire harness by lifting up on the retainer and pulling on the harness. Grip the harness not the wires. The harness seats with a good grip so you'll need to work it a little.
Remove the single retaining screw that holds the timer unit to the control panel. Once the screw is removed TWIST the timer unit to remove it. The timer is held in place by two retaining "prongs" that you will break off if you try to pull the timer off the control panel. Once free of the retaining prongs, the timer is off the control panel and you are ready to replace with the new one.
Install is the reverse of what you just did.
When you get to putting the knob back on don't forget to put the dial with the arrow back on first. This only goes on one way but it takes a pretty good push to get it to seat. Next, put the nylon retaining clip on the knob such that it's barely on and slip the knob on the timer post only to the point where you see the slot in the knob and the slot on the post line up. When the two slots are aligned, use the blade of the flathead screw driver to push the nylon clip into place.
Reseat and align the control panel, replace the three screws, plug the unit back in and you can watch the game while the little lady gets back to her washing. :) Just kidding ladies.
This is an easy repair that anyone can do with only a couple hand tools and a little patience. Getting the knob off is the hardest part and a little finesse will work better than brute force.
Have fun, you can do it.
Read less
Was this helpful?
Thank you for voting!
Gear teeth stripped out on both timer knob & timer.
30 of 38 peoplefound this instruction helpful.
William from Hillsboro, OR
Really Easy
Less than 15 mins
Super EZ repair. The replacement parts were spot on perfect. I removed 3 screws, slid the panel off, removed a wiring harness, the reversed the procedure. I used a set of needle nose pliers to slip the locking ring on the knob, and Bob's your uncle, all done.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nick - For model number WHDSR316G2WW
August 2, 2017
Last time it was used, tenant said it filled but would not advance. They emptied it by hand and stopped using it. The control knob spins freely either pushed in or pulled out.I took the control knob off and found what looked like broken off teeth on the plastic shaft which meets the knob. I can easily rotate the plastic shaft with pliers but the knob has no way to control the shaft. What do i need?
Hi Nick,
Thank you for the great questions. From the sounds of it, you will need to replace your control knob. That would be part number: PS1482286. However if you still are having problems with the machine advancing into the cycle, you might also have to replace the Timer.
I hope this helps!
4 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Donna - For model number WBSR3140G0WW
February 12, 2019
Hi again. It’s not the clip that holds the timer knob on. The broken plastic piece is under the compression ring (?) that is under the timer knob. There is a metal shaft that the timer knob fits on (that is connected to the machine) and around this shaft is a plastic ring? Gear? That the timer control knobiiks like it needs to engage with to work. Will replacing the timer take care of this? Thanks! D
Hi Donna, thank you for your question. Yes, if the part that is broken is actually on the timer itself, you would have to replace the timer. I hope that helps! Good luck with your repair.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Paul - For model number WHDSR316G1WW
December 5, 2017
When I start any cycle, the machine will not advance. I can manually turn the dial and it will spin, rinse, and evacuate water. Occasionally, in the cotton cycle, it will wash a load completely without my assistance. Do I need a new timer?
Hello Paul,
Thanks for your question. Prior to replacing the timer, we would recommend testing the lid switch and the water inlet valve with a multi-meter to check for continuity. Replace either of those parts if they are not showing continuity. If they are both intact and testing well, consider replacing the timer.
I hope this helps.
My timer knob spins freely. I took the knob and the ring off. The plastic part around the metal shaft that the timer knob goes on is broken. Does the timer have this plastic part? I mean i need to replace the timer? Thank you!
Hello Donna, Thank you for your inquiry. I have researched the model you have provided and have found the part you are looking for is PS270835. Good luck with your repair!
Was this helpful?
Thank you for voting!
Ralph - For model number whdsr316g2ww
September 19, 2019
Water will not turn off even after i unplug power
Hello Ralph, thank you for writing. This may be due to a faulty Triple Water Inlet Valve, part number PS1482391 for your model. You may also want to consider the Pressure Switch, part number PS1018030 as the cause. Good luck with your repair!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Washer-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WH12X10350","title":"WH12X10350","url":""}]
My Orders
