Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mary-Ellen L - October 16, 2021
Verified Purchase
Fast Service
I am a REALTOR and needed to purchase a part to replace on a washer for lovely elder buyer. It was easy to find what I needed, order arrived quickly. Only thing that I would say is that shipping was as much as the part...lol.
★★★★★
★★★★★
Florence C - September 26, 2021
Verified Purchase
Thank goodness for PartSelect
I am not by any stretch of the imagination a technically minded person yet with the guidance of PartSelect videos and customer service I was able to easily replace the timer on my washing machine. Problem solved and money saved. Thank you PartSelect for your wonderful service!
★★★★★
★★★★★
Leonard T - March 9, 2021
Verified Purchase
The part was perfect.
The part came very quick and fit perfect.
★★★★★
★★★★★
William S - December 24, 2020
Verified Purchase
Right part, right price, right now, right on!
Easy to find what I was looking for on the website. It turned out to be the right part at a good price with prompt delivery meant little down time.
★★★★★
★★★★★
Tom G - August 11, 2020
Verified Purchase
Easy repair, works great.
The part came next day and machine works great.
★★★★★
★★★★★
Kerry H - January 16, 2020
Verified Purchase
Timer knob
The part was in good condition and came fast. The appliance is back in working order.
★★★★★
★★★★★
Vincie O - July 30, 2019
Verified Purchase
Part, timer knob
The service was fantastic I ordered , on line,the part I needed for my washing machine. Received it the next day. The u - tube video helped me install it . Very very pleased .
★★★★★
★★★★★
Xander E - July 21, 2019
Verified Purchase
Perfect Fit
Wasn’t sure if I’m gonna be able to find a partner not very nice today where the washer is a few result. But the company made it very easy and it shipped out quickly and wasn’t crazy expensive. Thank you
★★★★★
★★★★★
Baeksan A - April 4, 2019
Verified Purchase
It fixed my washer!
Thank you!
★★★★★
★★★★★
ROBERT T - January 21, 2019
Verified Purchase
Replacement Knob worked great!
Received the item ahead of promised delivery date and was exactly as described. Fixed the problem!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 55 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control knob teeth were worn
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
Other Parts Used:
Charles from Dallas, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
507 of 511 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control knob stripped
The teeth on the control knob were broken off (not sure how it happened). the teeth on the stem of the knob turn the selector dial. To replace the control knob, I used a pair of needle nose pliers to remove the pin clip and pulled the knob off. The new control knob came with the clip already installed on the stem of the knob. It was a matter of pushing the new knob onto the shaft . . . and the rest is history.
Other Parts Used:
Robert from Joppa, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
76 of 81 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer on the washing machine wasn't working properly. Just spinning around not catching to set wash cycle
I found Partselect and searched for what I needed. Wasn't quite sure I had the right timer, so I called and gave them the model number and they did a search and found the right one. I ordered the part online and a few days later the parts were delivered to me. The timer fit right in and looked just like the origninal. Within 30 mins. washer was back in service. Another washer we have on the property wasn't agitating correctly. After taking off the agitator ( by pulling straight up from the bottom ) I found that the coggs on the agitator hub were all worn out. I removed the center screw from the shaft and pulled the old hub off. Installed the new one ordered from Partselect and washwer was back up and running in no time.
remove back screws to control panel. unplug timer. pull bad timer out. snap new timer in plug in connector. reattach screws to control panel. put knob on timer
removed control knob and dial with compression ring from front panel using 1/4in. nut driver removed 3 screws from rear of panel again using nut driver removed old washer timer unplugged wiring harness and reversed assembly took about 8 min.
Gear teeth stripped out on both timer knob & timer.
Super EZ repair. The replacement parts were spot on perfect. I removed 3 screws, slid the panel off, removed a wiring harness, the reversed the procedure. I used a set of needle nose pliers to slip the locking ring on the knob, and Bob's your uncle, all done.
Part Select inclusion of parts diagram helped determine which part was broken, and how to disassemble just what was necessary. I was planning to open up the control panel to get inside, which was not necessary. Assembly was simple for the same reason. Sometimes, it does help to read the "manual" first....
Other Parts Used:
Robert from Washburn, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
25 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dial Spins Too Freely
The grooves on the bottom of the control knob were worn away. I just pushed the timer knob clip off of the underside of the knob, removed it from the washer and put the new knob on and put the clip back on. It was a piece of cake!
took the needle nose pliers and removed the timer knob clip from the back of the control knob. Removed the control knob and the dial with compression ring. Installed the new dial compression ring and pushed the control knob on. Note: the new control knob comes with the clip allready on the back of the control knob. Took me about 3 minutes to replace.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
January 31, 2019
Hello!!
the outer knob will not spin the dial to start the machine. i have to manually turn the dial ring then push down the timer knob to get the washing machine to start. do i need to replace the knob or could it just be the clip?
thanks!!!
For model number WLSR2200JW33
Hello Rebecca, thank you for your question. You can check the clip to see if it is loose or broken. However, the best thing to do would be to replace the timer knob PartSelect Number PS1482286 which comes with a new clip. I hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
May 1, 2019
When I push in timer knob it doesn’t engage. It just spins around when you turn it. Could you tell me what part or parts i need? Thank you.
For model number GHWP1000M2WW
Hello Ron, Thank you for the question. If there is no visible damage to the knob or dial, I suggest replacing the Timer Switch, PartSelect Number PS3506805. Thank you for your inquiry, good luck with this repair!
Hello James, Thank you for the question. Very sorry but the eno20a 175d 3296 is not a valid number. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Clark
December 2, 2019
When i removed the broken timer control knob, the spindle it attaches to came out in the knob. How is the spindle replaced or re-attached? Thanks.
For model number WJRR4170GWW
Hello Clark,
Thank you for your question. The spindle cannot be reattached, you would need to replace it by replacing the timer switch for your model under part PS1482380 to fix the issue. Hope this helps!
GE washing machines works but i have to advance the cycles myself. How will i know if it's the entire timer or just the knob that needs to be replaced?
For model number WDRR2500K4WW
Hello Maribel, thank you for your question. If you have to advance the cycles yourself, the timer should be replaced. That is PartSelect Number: PS3406192. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Delois
June 27, 2023
my washer want come on plus it stop in the middle of a wash what you think that is
For model number GCWP1800D1WW
Hi Delois, thank you for reaching out. Based on our understanding of the issue, we would suggest you replace the timer, part number PS4704240, to fix the issue. We hope this solves your problem.
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your old timer dial is cr...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482286
Manufacturer Part Number: WH01X10310
