Do you have a Frigidaire fridge with a faulty dispenser? Our MODULE-DISPENSER might just be the solution you're looking for. It's a real deal original part from Frigidaire itself. Primarily designed to fit seamlessly into the dispenser housing on your freezer door, this part includes all you need ? an ice chute, a cradle, and an ice chute door. Not just a fanciful addition, this part is a necessity. It helps your dispenser work accurately, ensuring that your fresh fruits, veggies, and other essentials are stored properly with no power issues. Keep in mind, this part isn't only for Frigidaire fridges. It's also a great fit for select models of Electrolux, White Westinghouse, and Tappan. This means, it doesn't matter if your fridge model is a bit unique, there's a good chance this dispenser module will fit. But remember, safety first! When you're ready to install this part, make sure you disconnect your fridge first and put on some protective gloves. And before you click that 'Add to Cart' button, just double check the part number to make sure it's the perfect match for your model. Revive your fridge with the MODULE-DISPENSER and get your kitchen appliance working like new. Giving you the power to keep your perishables fresh and safe ? it's a small part that makes a big difference.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire.
Part# 240563639 replaces these:
240563631, 240563635
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My issue was condensation developing outside the ice/water dispenser location.
I ordered a replacement ice/water dispenser module from partselect.com using my model number. The correct color of grey was available. First, turn off power to the fridge. There are 3 number 2 phillips screws under the drip tray that mount the facing to the refrigerator. Remove those screws and gentle lift up on the facing to remove it from the slots that hold the top of it to the fridge. Unplug the cable and set the facing aside. Locate the power plug for the ice dispenser module. It should be to the left of the module. Remove the 3 screws that hold the module to the fridge and unplug. Gently pull foward to release the module from the fridge. Once it is free, push the water dispenser tube out towards the fridge doing so from the dispenser handle side until the tube frees from the old module(this is the hardest part to achieve but doable). Repeat the process in reverse to install the new module. This took me 15 minutes to remove and install the new one.
Other Parts Used:
John from East Quogue, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Armando
March 9, 2023
Can you provide Instructions for replacing module dispenser for this model fridge?
For model number LFSS2612TE3
Hello Armando, thank you for getting in touch. To replace the dispenser module, you need to remove the drip tray first. Next, use a Phillips-head screwdriver to unthread the screws securing the front dispenser panel. Slide the panel up to detach it, then disconnect the wire connector. Using the Phillips head screwdriver or a number two square drive bit, unthread the screws securing the module. Slide out the dispenser waterline and disconnect the wire connector to fully release the old assembly. To install the new dispenser module, you should increase the slack in the water dispenser line. To do this, detach the lower grille and use a 7/16-inch wrench to depress the retaining ring to release the water line from the coupler. Push the line up through the door to increase the slack. Now insert the end of the dispenser water line through the hole in the module and connect the wire connector. Fully position the module and thread the screws to secure it. Reinstall the front panel by first connecting the wire connector, aligning the tabs with the slots in the door, and sliding it down. Re-thread the lower screws, replace the drip tray, and insert the end of the water line into the coupler until fully seated. Finally, realign the grill and snap it into place. Plug the power cord back in, and your refrigerator should be ready for use. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tracy
February 16, 2024
The flap on my ice dispenser broke off. Do I need to purchase the entire Module Dispenser (Part# 240563639)?
For model number FFSS2615TS5
Hello Tracy, thank you for reaching out. Yes, the flap does not come separately. You may need to order the complete dispenser module, part number PS12728800, to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
James
April 17, 2024
What light bulb goes on the outside of the ice and water dispenser?
For model number LFSS2612TE0
Hello James, thank you for getting in touch. The dispenser light bulb for your model does not come separately, and it comes as a part of the control module, part number PS12728799. If you need help placing an order, customer service is open 7 days a week!
I have a Frigidaire refrigerator, model FFSS2615TS5. I am looking for the water dispenser lever in grey. Is that an option to purchase alone vs purchasing the entire ice/water dispenser part?
Thanks,
For model number FFSS2615TS5
Hello Danny, thank you for your inquiry. The water dispenser lever for your model does not come separately, and it comes as a part of the dispenser control module, part number PS12728800. We hope this helps!
Was this helpful?
Thank you for voting!
Rose
April 2, 2022
MODULE-DISPENSER - PartSelect Number PS12728800 - when it states “Manufactured by Frigidaire” Is it an original part or aftermarket product? It is for a Frigidaire Refrigerator MODEL # LFSS2612TF2
For model number LFSS2612TF2
Hello Rose, thank you for your inquiry. We only sell OEM original parts and the part PS12728800 is compatible to your model LFSS2612TF2. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
