This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
This refrigerator crisper glass insert is a genuine OEM replacement designed to restore the functionality and organization of your appliance’s lower storage area. Measuring approximately 17.12 inches ...
$144.98
In Stock
Questions And Answers for LFSS2612TF1
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Francesca
December 14, 2023
I can't find this self
For model number LFSS2612TF1
Hi Francesca, thank you for the question. Based on our research, your model comes with the following shelves:
1. The upper shelf for the freezer section is part number PS1148757.
2. The middle shelf for the freezer section is part number PS1148756.
3. The lower shelf for the freezer section is part number PS1148755.
4. The 2 shelves for the fresh food section are part number PS12364868.
We hope that helps!
Leaking water from the bottom of fridge ice building up in the bottom of the freezer drawer
For model number LFSS2612TF1
Hi Michael, thank you for reaching out. The issue of water leaking from the bottom of the fridge and ice building up in the bottom of the freezer drawer is often related to a blocked or frozen defrost drain. Here are some steps you can take to address this issue:
1. Unplug the Refrigerator: For safety, always unplug the refrigerator before performing any maintenance.
2. Locate the Defrost Drain: The defrost drain is typically located at the back of the freezer compartment. You may need to remove the back panel inside the freezer to access it.
3. Clear the Drain: If the drain is blocked, use a turkey baster or a similar tool to flush it with warm water. This can help melt any ice or remove debris that might be blocking the drain.
4. Check the Drain Hose: Ensure that the drain hose leading from the freezer to the drain pan is not kinked or blocked. You may need to remove the back panel of the refrigerator to access this hose. Replace it if its broken, the part number is PS11703640.
We hope this sorts out your problem!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
