This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
This refrigerator crisper glass insert is a genuine OEM replacement designed to restore the functionality and organization of your appliance’s lower storage area. Measuring approximately 17.12 inches ...
$144.98
In Stock
Questions And Answers for LFSS2612TF2
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dontri
December 5, 2022
I need the shelf on the door for my condiments. I also need the light bulb on the refrigerator side
For model number LFSS2612TF2
Hello Dontri , thank you for your question. The Lower two Door Bins are part PS12364199. The Upper two Door Bins are part PS430122. The Light bulb is part PS12364857. We hope this information will help you.
I have a 0 on the degital tempurture for freezer and F on the fridge side. Is there a way to reset it or does this mean I need the new part
For model number LFSS2612TF2
Hello Kelly, Thank you for your inquiry. You can try resetting it by unplugging the refrigerator for 10 minutes and then plugging it back in, but this message usually indicates that the refrigerator is turned off, there is an issue with the temperature sensor, or there is a stuck key on the key pad. You can test the temperature sensor with a multimeter, but if resetting the refrigerator does not fix the issue, then you may also need to replace the control board. Good luck with your repair.
I need the round black rubber seal for the dispenser part of the ice maker on my model # LFSS2612TF2
For model number LFSS2612TF2
Hi Terri, thank you for contacting us. The rubber seal comes attached to the dispenser module, part number PS12728799. It is not listed separately. We hope that helps!
Does this model have an air filter? If so where is it. Also what is model # for the water filter?
For model number LFSS2612TF2
Hello Cathy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3412266 for the Water Filter. We do not list a Air Filter for this model. We hope this is helpful!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
