This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
Need more organized space in your fridge door? This clear plastic shelf bin is perfect for storing 2-liter bottles, condiments, and other everyday items. It installs easily—just snap it into place, no...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
Need more space on your fridge door? This clear shelf bin is perfect for storing bottles and jars. It’s easy to install—just snap it into place, no tools needed. It fits many Frigidaire, Kenmore, and ...
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator. Sold individually.
Need a new frame for your fridge’s crisper drawer? This one supports the drawer and holds the shelf on top—just note that the glass isn’t included. It’s got raised edges to help catch spills and keep ...
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
This dairy door, also known as a dairy bin cover, is a genuine OEM replacement part for your refrigerator. The dairy cover is a plastic part that serves as a covering to a shelf on your fridge door, t...
$96.14
In Stock
Questions And Answers for FFSS2315TS5
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Delma
February 13, 2023
Where to order replacement bulbs ?
For model number FFSS2315TS5
Hello Delma, Thank you for your inquiry. We show the LED light bulbs for the model number that you have provided as part# PS12364857 and we do have them available on our website. We hope this helps you.
Replaced filter twice and water just comes out as a trickle and ice maker does not make a complete ice cube. The ice cubes are about 1/2 normal size. What is the fix?
For model number FFSS2315TS5
Hello Tom, thank you for getting in touch. As you have already replaced the filter, we would recommend checking the water filter base, part number PS12364175, to solve the problem. It holds the water filter and connects the water lines to the water filter. We hope this helps!
Was this helpful?
Thank you for voting!
Linda
September 23, 2022
I replaced the evaporator fan 4 months ago. now it is nosey in the ice maker area. the freezer temp. went up to 7 when I had it set at 5. I set it back to 5 and now it is still making noise.
For model number FFSS2315TS5
Hello Linda, thank you for your question. Please make sure there is no ice buildup in the evaporator fan blades area and also make sure the evaporator fan motor is running fine. If there is frost buildup near fan blades we would recommend defrosting them and inspecting fan blades, part number PS473177, for damages. If blades are tilted or broken they will need to be replaced. Besides that, a faulty fan motor, part number PS12728811, can also cause noise. Also, make sure that the defrost, part number PS469522, is working fine because if it is faulty unwanted temperature variation can occur. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
I moved the fridge to the garage where there is no waterline to hook up to, the freezer section near the ice maker gets HOT to the touch, externally.
For model number FFSS2315TS5
Hello Rita, thank you for contacting us. That external "hot to the touch" sensation near the ice maker is a direct side effect of moving the fridge away from its waterline while leaving the ice maker turned ON. When the ice maker is left on, it continuously enters its "harvest cycle" to dump the ice. To loosen ice cubes from the mold, the ice maker activates an internal heating element. The internal heater runs repeatedly or stays energized much longer than intended. This concentrated heat transfers directly through the freezer door and cabinet, making the exterior feel hot. To stop the overheating immediately, you need to turn off the ice maker mechanism. To stop the ice maker, raise the wire signal arm until it clicks and locks in the UP or OFF position. The wire signal arm is mounted on the side. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
