This lid assembly is for washers and covers the washer tub opening. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# W11101059 replaces these:
AP6230882, W10631098, W10814585, W10843824
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace Cracked Whirlpool Cabrio Washing Machine Lid
This is a very simple repair. My lid was severely cracked on the back left corner where there seems to be a lot of pressure/torque required to shut the lid. There is a metal L-shaped "tab" that inserts into the lid on both sides of the back edge of the lid. The lid is attached to these metal tabs with two screws for each side. My cracked lid had resulted in the lid breaking off of the metal tab with the screws still anchored into the metal tab.
Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished.
Other Parts Used:
Jonathan from HELENA, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge on left broke away from plastic framework around glass
Removed four screws,slid old lid off then slid new lid on and tightened four screws back,first lid was broken upon delivery, getting my refund has been a nightmare,still haven't been refunded,it's going on 3 weeks,they told me 72 hours,other than that..
Other Parts Used:
Rick from MORENO VALLEY, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic frame broke that holds hinge in place
First lid came and glass was shattered n box was open,called was told they credited my account and reordered, still haven't received credit for the first lid and it's been 3 weeks,other than that it was 4 screws to replace
Other Parts Used:
Rick from MORENO VALLEY, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan Johnson
February 13, 2019
Does lid:W11101059 come with the plastic around the glass? This is the part of the lid that is broken on my machine.And will not let the lid close to do laundry. Any insight would be a great help.Thank you.
For model number WTW7300DWO
Hello Dan, Thank you for your question. Yes, PS12070901 does include the black plastic around the glass. Good luck with your repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Beth
February 20, 2019
The current lid on our washer is cracked. We have a temporary fix but it needs to be replaced for long term use. Is this the correct lid for our model number ? And how difficult is it to replace? Thanks!
For model number WTW8040DW0
Hello Beth, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS12070901. According to a previous customer the lid is held on by 4 screws and it was a easy repair. Thank you for your inquiry, good luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Priscilla
March 19, 2023
The lid on the washer on the left side busted out around the hinge and I was wondering if I will need to replace with hinge when replacing the lid as I am not sure what caused it to bust at the hinge.
For model number WTW8040DW4
Hello Priscilla, thank you for your inquiry. There are several pieces that make up the hinge assembly. The part you had referenced is the Lid only PS12070901. There is also Wire Hinge - Left Side PS11746533, Wire Hinge - Right Side PS11746675, Right Hinge PS11770183 and Left Hinge PS11731637 and the Bearing PS12348055. We suggest looking at the parts carefully for any damage or defect. We have photos of the parts for reference. We hope this is of some help to you.
Do you have to buy the glass lid or can you get an all metal one?
For model number WTW8040DW4
Hi Carson, thank you for the question. The lid glass for your model is not sold separately, it comes as a part of the lid assembly. You may need to order the entire lid assembly, part number PS12070901. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Eugene
March 18, 2023
How do I replace seal around lid closest to the display
For model number WTW8040DW
Hello Eugene, thank you for contacting us. First, remove the front of the washer by pulling it forward. Slightly push the lid up and push it back to unlock the washer's top front. Press the two spring clips on the underside of the washer top to free the control panel interface. Unscrew the back metal plate of the control panel, and you can remove the panel and replace the seal, part number PS10062670. We hope that helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12070901
Manufacturer Part Number: W11101059