
Wire Hinge - Right Side
$28.88
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11746675
Manufacturer Part Number WP8572974
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore.
Part# WP8572974 replaces these:
AP6013449, 8572974
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
February 19, 2019
How do i install the wire hinge (right side). The left side has already been installed by a repairman. (unfortunately i was not able to observe the procedure).Thank you!
For model number BTW6700TQ1

Hello Richard, thank you for your question. First remove the plastic cover from lid. There should be two screws toward the back corners of the lid. Next remove screws holding hinges in place. Some might be tight due to rust build up, so use some wd- 40 to loosen any rust. and clean up the cover. Then change out the hinges and screws. The tools you will need are torx screwdrivers. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Part Videos
Replacing your Whirlpool Washer Wire Hinge - Right Side

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746675
Manufacturer Part Number: WP8572974
Manufacturer Part Number: WP8572974
Brand
Model Number
Description
