Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fuad K - March 31, 2021
Verified Purchase
Worked as expected
Accurate part delivery.
★★★★★
★★★★★
Pieter V - March 2, 2021
Verified Purchase
Perfect part
The part was an exact match. Once I got the dishwasher door apart it went in smoothly. Thanks!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Electronic control board defective. Caused by insect.
Remove door, take out screws to get to control board. remove the panel disconnect the attachments. Install the new board and connect the attachments. Reassemble the door.
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
October 7, 2019
The detergent dispenser doesn't open. I got a new dispenser from you, didn't fix the problem. I suspect now that it's the electronic control board. Every other function works ok. Any way to test this before i spend more money? Can i return the dispenser?
For model number FPID2495QF0A
Hi Peter, thank you for your question. Unfortunately only a technician would be able to test an electronic control board like that. We have a 30 day Return Policy. More information can be found here: https://www.partselect.com/Thirty-Day-Returns.htm. Parts must be in resaleable condition to qualify. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 19, 2021
Fails to cycle through cleaning cycle. Stops, seems like it starts and then fails to step through the steps. I'm thinking the control board.
For model number FGID2474QF3B
Hello Robert, Thank you for the question. Normally this indicates the Control Board is not going through the cycles properly and will need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
March 30, 2023
No lights on control panel, I have a P/N: number on the only pc of paper i have with this dishwasher. PN:808936670 Can u guys tell me why I Have NO lights on the control panel at all ? Thanx Mike
For model number LGID2475 with no other numbers or letters on it
Hi Mike, thank you for reaching out. Based on our research, the issue is probably with the control board, part number PS11758324, and you may need to replace it. Before replacing it, we would recommend checking the electric power supply and wire connections to ensure that power is being delivered to the control board. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
February 20, 2023
All the control lights work but unit won't start when we push start button.
For model number FPID2495QFOA
Hi James, thank you for contacting us. If your dishwasher is not starting, we recommend you check the control board, part number PS11758324, and the door lock, part number PS9492291. We have included a link from our website that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
EE error code will not reset. Is this likely the control board?
For model number FGID2477RF3A
Hi James,
Thank you for your question. The EE error code is letting you know that there is an error on the main control board. To remove the code, unplug or turn the circuit breaker off for 10 minutes to clear the code. If it does not resolve the issue, you will to replace the electronic control board. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
March 25, 2019
My dishwasher seems to have the drain pump running at all times.....any ideas?
For model number Fpid2495qf0b
Hello Mike, thank you for inquiring. You may want to replace the Pressure Sensor Switch part PS11731946. We hope this helps.
Was this helpful?
Thank you for voting!
Barry
March 17, 2023
Control board part 807022404
No display, have power to DW connection. How do I check for power to control board or is there another control board somewhere else?
For model number Frigidaire Gallery DW
Hello Barry, Thank you for your inquiry. Sadly, only an electrician can test for power to the control boards, but you can visually inspect it for any visible damage or loose connections. In order for us to locate the correct parts and repair information we will require the model number of the dishwasher. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.
Control panel lights up, but will not start machine.
For model number FGID2476SFOA
Hi Rhonda, thank you for contacting us. If your dishwasher is not starting, we suggest that you check the control board, part number PS12070954, and the door lock, part number PS9492291. If you require assistance to place an order, please contact customer service. We hope that helps!
Ok, just to make sure, my earlier question stated that the drain motor is running all of the time...your response was to replace the pressure sensor switch....what i failed to mentioned was that the motor/pump runs if the door is closed or even if it is open...the only way to make it quit running is to pull a basket out part way.....seems weird, but it stops running then......
For model number FPID2495QF0B
Hi Mike,
Thank you for your question. If the motor is running whether the door is open or closed, the door lock or latch may not be closing correctly. It may be damaged and if so, it will need to be replaced. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Ken
November 16, 2021
On my Dishwasher the motor runs all the time, none of the functions on the touch pad works. I also get an error code CO on the display
For model number FPID2495QFOA
Hello Ken, Thank you for the question. The CO Error code normally indicates a communication Error from a defective Control Board. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
