This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 30, 2019
How to remove the middle spray arm to clean out some holes? The white ring it seems
Is clipped together and it is not clear how best to release without breaking the tabs.Thanks
For model number FGID2474QF3B
Hi Robert, or video should help you, please watch here: https://www.youtube.com/watch?v=7TV0f1yMZhU. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Matt
September 21, 2023
How do I replace the heating element? My heated drying feature is not working
For model number FGID2474QF3B
Hi Matt, thank you for reaching out to PartSelect. If you are facing a heated drying issue, then the circulation pump assembly with heater will fix this issue. The heater for your model does not come separately, it comes within the circulation pump assembly. You may need to replace the circulation pump assembly, part number PS12365774. We have found the installation instructions for the circulation pump assembly. These instructions are not for the exact model but will help you in installation. Turn off the power to the dishwasher and shut off the water supply valve. Then disconnect the drain hose from the sink drain and tip the appliance back and rest the rear panel on a towel or blanket. Then remove the bottom cover panel if any by just un-threading the screws. And then disconnect the wires from the pump circulation assembly. After that, remove the pump retaining bracket by un-threading the screws. And pull the pump circulation assembly out to detach it from the sump. Follow all these steps back to install the new pump circulation assembly. We hope this information is useful!
Watched a video on you tube and did the repair myself. Very easy. Repairman wanted two hundred to do the repair.If i ever need another part for any appliance i will order the part from you and do it myself. Thank you.
