This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
July 30, 2021
Won,t shut off. Stays at .30 on panel. I shut circuit breaker ,waited 40 mon ,turned back on same problem
For model number FGID2474QF0A
Hello Charles, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: pressure sensor switch, the electronic control, the door lock, and the float switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. If these parts test ok, then check the water inlet valve and the heating element. Hope this helps.
I'm getting error message i20 during the middle of a dishwashing cycle. The cycle will complete by pushing the start button. At the end of each cycle there is a small amount of water left in the sump. I've tried to clean the drain pump and drain line using a wet vac and hot water. This helps for a few cycles. Does something need to be replaced or cleaned?
For model number FGID2474QF0A
Hi Peter, thank you for your inquiry. The error code i20 indicates that the dishwasher has failed in draining and lowering the water level within the expected time. Based on the description that you have provided and the error code, we concluded that the issue is with the drain pump, part number PS9492626. We would suggest replacing the drain pump to fix the issue. We hope this helps, good luck with this repair!
I have a code 1co on display and can not get it removed to set and start dishwasher. What is it?
For model number FGID2474QF0A
Hi Bill. This is an issue with the main control board. You will have to replace it if resetting the dishwasher does not work. Thank you for your question and good luck with your repair.
Watched a video on you tube and did the repair myself. Very easy. Repairman wanted two hundred to do the repair.If i ever need another part for any appliance i will order the part from you and do it myself. Thank you.
