Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Emily
January 15, 2018
My washer will only work on the small and medium water levels. Will this part fix it?
For model number RTW4640YQ0
Hello Emily,
Thanks for your question. Yes, this part is the most likely solution to the water level issue.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
May 13, 2019
Clothes still very wet after final spin
For model number NTW4630YQ0
Hello Matt, Thank you for the question. If the drum is spinning normally and at the correct speed, it could be an issue with the draining. I suggest clearing the drain hoses and make sure there is no blockages. You can also clean out the pump. If every thing is clear you may need a new pump, PartSelect Number PS11751719. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
November 21, 2019
Admiral washer still continues to overflow the washer basket on the large load selected. I have changed the water level switch, and checked the water pressure hose ps11741846 for any blockage. Do you have any other suggestions? Thanks.
For model number ATW4675YQ0
Hi Dave, thank you for your question. The next part to check would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
November 13, 2019
After filling the washer for large load, when the wash cycle starts water overflows the drum. I changed the water level switch and checked the washer for level but the water still overflows the drum on to the floor. Any suggestion to what else might be wrong or bad?
For model number ATW4675YQ0
Hello Dave, Thank you for the question. I suggest checking the Water Pressure Hose PartSelect Number PS11741846 for a blockage or suds build up that may prevent the Water Level Switch to receive the correct pressure. Hope this helps!
My washer will not stop filling. It does stop if I unplug it. Leads me to believe it is the switch? Before I buy this part, can you advise if this is the right fix?
For model number NTW4650YQ0
Hi Daniel, Thank you for the question. Only way to know for sure this is the part needed to fix the filling issues is to test the switch with a multi meter to check for continuity. Hope this helps!
Was this helpful?
Thank you for voting!
Dave
November 12, 2019
I changed the water level swich on my Admiral washing machine because the water was spilling over the basket during the washing cycle. The problem still exists. What os the next part that could cause the water to overflow the basket during the wash cycle?
Hello Dave, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
DAVID
December 5, 2019
My washer will overflow once in a while, not every load. It overflows on all size settings about once every month. But most of the time its fine. It seems to over fill on the rinse cycle, after draining the soapy, dirty water because the overflowing water is relatively clean and without soap. I celebrated the washer twice. Is this the part I need or would you recommend something else? Thank you for any help
For model number NTW4630YQ0
Hi David, its possible this would fix it, it could also be the water inlet/valve assembly. Thank you for your question and good luck with your repair!
