Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tatiana
November 6, 2018
How is the strike installed? It is supposed to be a stick in and roll into place deal but i can't seem to make it work. Please consider showing me how it is done.
For model number 7MWTW5700YW1
Hi Tatiana, thank you for your question. Make sure you place the strike in the right orientation to go on to your lid. To help lock it into place you have to turn it clockwise and then push the tabs in. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
James
May 28, 2023
How do I remove this part and install it?
For model number Maytag mvwx655dw0
Hello James, thank you for the question. According to our research, we are providing you with instructions that will help you replace the strike.
1. Push a small screwdriver into the hole of the lid strike to release a locking tab.
2. Turn the strike anticlockwise.
3. Pull the strike out of the mounting hole.
We hope this helps!
Was this helpful?
Thank you for voting!
Tom
February 23, 2024
How do you remove plastic on front of lid to get to screws that hold the strike to replace with a new one
For model number WTW5840BW0
Hello Tom, thank you for your question. First, remove the screws on the top panel of the washer to the cabinet. Next, lift and remove the top panel of the washer. Then, locate and remove the two screws that secure the strike to the washer cabinet. Finally, pull out and remove the old strike from its bracket. We hope this helps.
Was this helpful?
Thank you for voting!
Erin
May 5, 2018
Is this the part that locks the lid?
For model number MVWX700XW2
Hi Erin,
Thank you for your question. This is the part that actually goes into your lock and helps to lock the lid. I have listed the lock down below for you. I hope that helps. Good luck with your repair.
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750868
Manufacturer Part Number: WPW10239968