This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 4 hrs and your part ships today!
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$72.93
In Stock
Order within the next 4 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 4 hrs and your part ships today!
This part changes the transmission from agitation to spin mode. This actuator is for washers.
Actuator shifts the splutch and monitors the position of the splutch.
$93.59
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for MVWX700XW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
February 27, 2020
The fabric softener does not dispense into the washer machine. Everything else seems to work fine it completes a full cycle
For model number MVWX700XW1
Hi Ken,
Thank you for your question. According to your owner's manual, the fabric softener option must be selected to ensure the the proper distribution at the correct time in the cycle. Do not overfill or dilute. Overfilling the dispenser will cause fabric softener to immediately dispense into the washer. If the extra rinse option is selected, fabric softener will be dispensed into the last rinse. Also if the dispenser is clogged, you will need to clean it. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cheryl
April 9, 2023
What would cause the washer not to rinse
For model number MVWX700XW1
Hi Cheryl, thank you for reaching out. Various issues can cause the washer not to rinse: washing machine being overloaded, and hoses clogged or bent. We recommend checking the lid latch assembly, part number PS3497627, to fix this issue. We hope this information is helpful!
Washer stops after rinse cycle, rinse light is on. All indicator lights and clock are not lit
For model number MVWX700XW1
Hi Todd, thank you for your inquiry. Clean the drain pump, filter and hose for any debris/blockage. If there is no blockage, you possibly have a faulty drain pump, part number PS11751719. We hope this helps.
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.