Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Deborah H - December 15, 2022
Verified Purchase
no need to get a new washer!
I recently thought it was time to get a new washer/dryer. A piece on agitator had broken off. But then I looked in the manual and found it as just an agitator cap, so I ordered one from PartsSelect for a very reasonable price, and it fixed the problem perfectly. Also, the part arrived two days after I ordered it. You can't ask for better service!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!
I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased.
I pulled the cap and took a socket wrench turned the stud agit off and removed the upper agitator. Than I assembled the new agitator with the new clogs put the agaiator back on and tightened the stud agit. Replaced new cap and done! Easy job!! Everything is working like new again. This whirlpool washer is 14 years old and still going strong!
First I removed the top cap on the agitator, then I removed the second cap inside the agitator. I moved the agitator with my hands and saw that the "dog ears" were worn and no longer touched the agitator and couldn't move it. I then used a nut driver to remove the nut that held the top portion of the agitator onto the bottom portion. I made a note of the worn parts, got online at PartsSelect.com and ordered the replacement parts. A few days later the parts arrived and I repeated the above process in reverse using the new parts. It now works like new!!! It wasn was very easy. Thanks!!!
The old agitator would fly off during spin cycle due to broken tabs
I just lined up the tabs with the slots on the spindle and it snapped right on with small amount of pressure. The cap also snapped right on. Might as well replace the cap for and extra 6 bucks if you have to replace the agitator.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paulanne
October 1, 2019
How do I get the agitator cap off, it won't budge
For model number LBR4132HQ1
Hello Paulanne, Thank you for the question. The cap just pulls off the top of the Agitator. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
December 3, 2021
How do you remove the agitator cap on the NTW4516?
For model number NTW4516
Hi Michael,
Thank you for your question. The agitator cap is just pressed onto the top of the agitator. To remove the old agitator cap, insert a small flathead screwdriver into the slot on the agitator cap to pry it loose. To install the new agitator cap, line it up with the upper agitator and then press down on it to lock it into place. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
January 11, 2019
How do you install the top agitator cap. It seems to be the same size as the agitator hole and will not fit in even when lubed with soap.
For model number LSR6332KQ0
Hello Jim, thank you for your question. Sometimes over time, the plastic cap or agitator can warp slightly and cause the cap to not seat in the agitator properly. I would recommend replacing the agitator which includes the cap PartSelect Number PS334557. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cynthia
December 6, 2017
Does the lint filter hold the upper agitator on?
For model number LA5300XSN0
Hi Cynthia, Thank you for the question. The agitator is held in place by a washer and screw, Part Number: PS11741866. Hope this helps!
Was this helpful?
Thank you for voting!
Salvador
January 26, 2018
How many inches is this cap?
Hello Salvador,
Thanks for your question. This cap is approximately 4 inches in diameter.
I hope this helps.
Was this helpful?
Thank you for voting!
Alen
May 2, 2018
For some reason the agitator cap comes off during the cycle. It doesn't matter which cycle i use. The washer seems to be functioning properly i just have to look for the cap after each wash so i don't put it in the dryer. I don't want to buy a new cap because i don't know if it will solve the problem. The cap looks fine.
For model number LXR7244PQ
Hello Alen, thank you for your question. If the cap isn't broken, or cracked in any way the issue would be with the agitator itself. I would recommend replacing the agitator, which would come with a new cap as well. The part number for the agitator is 285574. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This lint filter sits on top of your washer's agitator. Not only does it filter the lint out of your washing machine, but it also helps the agitator to move clothing around on the inside of your washing machine.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741199
Manufacturer Part Number: WP3355758