![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Washer Drive Pulley Specifications
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Washer Drive Pulley
![Replacing your Whirlpool Washer Washer Drive Pulley Replacing your Whirlpool Washer Washer Drive Pulley](https://img.youtube.com/vi/T2ZfHgVRUXw/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Spinning Issues | Spins slowly | Will not drain
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# W10721967 replaces these:
AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239971, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Joseph N - November 10, 2023
Verified Purchase
Washer Drive Pulley Replacement
Part was delivered quickly. Repair was relatively easy. Washer agitates again.
Ysabelle F - August 31, 2023
Verified Purchase
Excellent service, great price, easy to follow video for thé repair! Very satisfied!
Excellent service! great price, easy to follow video for thé repair! Very satisfied!
Celeste W - April 13, 2023
Verified Purchase
Easy process and fast delivery
So, surprised to get the instructional video emailed to me with the receipt...made my husband look like a superstar when he replaced it so efficiently. No one knew about the video, lol!
Richard B - July 23, 2022
Verified Purchase
Great parts perfect fit
Perfect fitting parts , and with the help from the video you.supplied replacement was a breeze Thanks for your great service
Paul G - May 4, 2022
Verified Purchase
Noisy
Didn’t fix the problem
![PartSelect logo](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/originals/psca-house.png)
June 18, 2022
Thank you for your review. I’m sorry to hear that happened, we will be in touch soon to help fix this issue.
Donna W - July 7, 2020
Verified Purchase
Easy repair
The part arrived quicker than expected and in perfect condition. My husband was able to put it in that night and my washer is working properly again and is so quiet too. Who knew that a small cat toy mouse could cause the damage that it did. We have now taken even more precautions to prevent the cat's toys from getting under the machine. I once again enjoy doing laundry.
Barbara K - June 3, 2020
Verified Purchase
Quick delivery
The part was as described and works great. I am so happy that didn't have to call repairman.Thank you
Brian G - April 18, 2019
Verified Purchase
Easy repair
Came in 1 day.
Richard M - October 6, 2018
Verified Purchase
Washing Machine Clutch Replacement
Clutch kit arrived quickly. Replacing the old worn clutch was reasonably easy and restored the washer to proper operation. No more grinding noise when switching between agitate and spin or extended cycle times. The clutch is a normal wear part so I think I will order another to keep on hand for the next time replacement is required,
Elard M - July 25, 2018
Verified Purchase
I got the parts on time.
I can not find the instructions to change the new parts I order . Could you please gave me some instructions asap.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 15 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Other Parts Used:
-
Jerry from WALLA WALLA, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
83 of 112 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Other Parts Used:
-
David from BLOOMINGTON, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
37 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't spin properly
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
Other Parts Used:
-
Beverly from MADISON, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
27 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making loud noises.
The video you sent me was very helpful told me the exact tools I needed and how to do it.
Thank you
Thank you
Other Parts Used:
-
Roy from BROOKLYN, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding
Following what the video shows how that they send with your part email, confirmation or receipt!! Easy Peasy!!
Other Parts Used:
-
Craig from MURFREESBORO, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loose pulley
Tightened up the pulley as the video showed me that might be the issue.
Other Parts Used:
-
Joseph from BAKER, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heavy loads did not spin dry properly
I followed the instructions provided by the video which I thought were spot on. Even to the size of the phillips screw driver.
Other Parts Used:
-
Chet from CLEARWATER, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tub motor shot
Please check the order was refused so I would not have to pay to ship back. The lady I spoke to on the phone said to do it this way. I have been TRYING to call for 2 weeks but no one is answering the phone due to CV19!!
The order is back at your warehouse. Please give me my refund!! Plus I have emailed your CS dept. numerous times with NO answer, only automated.
The order is back at your warehouse. Please give me my refund!! Plus I have emailed your CS dept. numerous times with NO answer, only automated.
Other Parts Used:
-
melanie from GREENFIELD, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the washer goes into a spin cycle, I would hear an intermittent loud clattering noise. I think the clutch teeth above (the cup part that is spring loaded) and the belted pulley's teeth below are not fully seating on each other during the spin cycle.
W10721967 Splutch Cam Kit
Assuming the pulley nut was properly tightened at the factory. I think this problem occurs because of ever-so-slight rounding of the splutch cam teeth from the actuator engaging and disengaging over whatever time frame there is before a clattering noise develops.
When I took off the 13mm nut using the adjustable strap tool, it felt tight to me...Was it put on as tight as it should have been at the factory? Who knows. I don't have the torque specification of this nut on that plastic pulley.
Watch the videos to remove and replace the belt cover and belt, actuator and splutch cam kit.
Pay particular attention to tightening up the nut. I put the pulley on and hand-tightened the nut. I used the adjustable strap tool and before I tightened everything, I pushed up on the pulley to press against the spring pressure in order to mesh the teeth together. After the nut was tight, I repositioned the strap tool and gave it another go, further tightening it. You see earlier that day, I only tightened it up once because I thought it was good and tight. I put everything back and within a half-hour it was clattering again and I could loosen the nut I thought was tight by hand! I fooled myself. That's why I did it twice, and don't be afraid to give it a good second tightening effort. Two weeks now and the wife is currently very happy.
Assuming the pulley nut was properly tightened at the factory. I think this problem occurs because of ever-so-slight rounding of the splutch cam teeth from the actuator engaging and disengaging over whatever time frame there is before a clattering noise develops.
When I took off the 13mm nut using the adjustable strap tool, it felt tight to me...Was it put on as tight as it should have been at the factory? Who knows. I don't have the torque specification of this nut on that plastic pulley.
Watch the videos to remove and replace the belt cover and belt, actuator and splutch cam kit.
Pay particular attention to tightening up the nut. I put the pulley on and hand-tightened the nut. I used the adjustable strap tool and before I tightened everything, I pushed up on the pulley to press against the spring pressure in order to mesh the teeth together. After the nut was tight, I repositioned the strap tool and gave it another go, further tightening it. You see earlier that day, I only tightened it up once because I thought it was good and tight. I put everything back and within a half-hour it was clattering again and I could loosen the nut I thought was tight by hand! I fooled myself. That's why I did it twice, and don't be afraid to give it a good second tightening effort. Two weeks now and the wife is currently very happy.
Other Parts Used:
-
TERRY from WAUKEE, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
5 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was stuck on rinse cycle
Research showed it was the transmission and the actuator . Parts were super easy to install and it solved the issue 100%
PS - I put some light lithium grease on the transmission and it’s quieter than it was when new
PS - I put some light lithium grease on the transmission and it’s quieter than it was when new
Other Parts Used:
-
Michael from HARWICH PORT, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
January 13, 2018
My washer is making a load noise like a bad bearing in spin cycle. It will also make a noise with the tub empty when its spun by hand. Could this be the clutch or possibly the bearing in the gear case. Thanks
For model number MVWX700XW1
Hi Chris,
Thank you for your question. It looks like most of the time when you are having that sort of issue, the clutch and the gearcase are the parts that are most likely causing it. It sounds like it is just a wear and tear issue so you should be able to see if any of your parts there have simply just worn down. I hope that helps. Good luck with your repair.
27 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
February 28, 2019
Washer spins and drains but will not agitate in wash mode?
For model number mvwc565fw0 maytag
Hello Patrick, Thank you for contacting us. I suggest checking the following parts: PS10057144 Washer Drive Pulley, PS11747978 Drive Belt, and PS6012095 Drive Hub Kit. Have a great day!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
April 17, 2019
I replaced suspension rods and now when my washer is on spin cycle it makes a loud banging noise and jumps and bounces all over the place which part should i inspect for damages
For model number ntw4650yq0
Hello Bill, thank you for your question. We would recommend checking drive block PartSelect Number PS11741977. If the Drive Block is damaged it can cause the tub to be off balance and cause it to shake. Hope this helps, good luck with this repair!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Evan
February 20, 2018
It goes thru all the cycles and agitates. Once it gets to the rinse, the agitator spins up but the basket starts to spin and can't keep up making a slipping sound. This causes it to wobble and vibrate which shuts down the spin cycle. I did inspect the clutch cam and the teeth are not worn down. Could this really be the clutch cam, belt, or the splutch? I did put in a new actuator with no new result.
For model number MVWC400XW4
Hello Evan, thank you for your question. I would definitely suggest replacing the Clutch W10721967, especially if the actuator was replaced already. You may want to replace the belt as a precaution while your're in there. A worn belt can cause slippage as well. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 13, 2017
My machine would start the wash cycle but would not run the spin/drain cycle and would stop - clothes would be wet - we were able to put it on drain/spin for a little while and now it won't do that
For model number MVWC450XW2
Hi John,
Thank you for your question. The first part that I would suggest you check is your lid latch assembly. It sounds like that part has failed and will not let you go into your spin cycle any longer. The other part you would want to check is your shift actuator and then this part, you clutch assembly. I hope that helps. Good luck with your repair.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Norman
November 30, 2017
The tub will not agitate. But the tub will spin? So is it partselect #ps10057144 what i need to fix this problem?
For model number MVWX655dwo
Hi Norman,
Thank you for your question. The clutch assembly is one part that will fix the issue. There are some parts that you will need to check to see which one is causing the issue. You will need to check the drive belt, the lid latch assembly, the washplate, the shield and the hub. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
August 17, 2017
Washer makes loud whining noise on spin cycle. Also keeps stripping out wash plate splines.
For model number WTW5640XW0
Hello Jim,
Thank you for contacting us.
This generally occurs when the washer has been overloaded. It may also indicate that there is something caught between the wash plate and the tub.
I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Guy
December 20, 2017
At the end of a wash clothes are rapped around the agitator in a ball ,could this be caused by the clutch brake? If so what part is it. Thank you, guy
For model number WTW4800XQ
Hi Guy,
Thank you for your question. Based on what you described, it does sound like the clutch. The clutch may be rusted and worn and you will need to inspect it to see if it is cause of the clothes wrapping around the agitator. I would also check the agitator directional cogs located at the top of the agitator to see if they have come loose. Sometimes this may cause the issue as well. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
January 18, 2018
Motor will not turn during gentle agitation or low spin test in the manual test mode. It hums. It will spin if i give the belt a little pull when in the agitate test mode. The motor will turn in the agitate and spin tests if i remove the belt. I replaced the capacitor, but still have the same problem. Does this indicate i need a new clutch assembly?
For model number MVWC400XW2
Hi Gary, Thank you for the question.If there is no loud noise like a grinding the clutch should be ok. Your issue sounds like the motor is defective and needs to be replaced. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
ALFRED
June 24, 2019
Oil/grease splatter or leaking on drive belt causing belt to keep coming off.
For model number MVWX655DW1
Hello Alfred, thank you for your question. If there is oil/grease splatter leaking from the unit you will want to replace the Gearcase Part #: PS11773169. Please enter the part number into the site for current price and availability. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10057144
Manufacturer Part Number: W10721967
Manufacturer Part Number: W10721967
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)