- Home
- 110C60242510
- Instructions
110C60242510 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The sound was like a cement mixer
3 of 4 people
found this instruction helpful.
-
Russell from Apache Junction, AZ
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
When i finally got sick and tired of hearing it when she used the dryer. I popped the top flipped it up unscrewed the 2 screws holding the front panel of the body on, picked up on it and pulled it off the drum. I then reached back to the rear right corner and stretched the tentioner and pulled the belt off the motor pulley.Then I picked u
... Read more
p the belt and the drum and pulled it out of the dryer body. After seeing the drum support roller that is mounted on the base, and back of the left side I decided to go online and find this sight that had the drum support rollers as a set with the keepers and the push nut for the brace as a set for a really fair price. If your unit has a warranty "do not" take anything apart and do not order any pats until you check with your dealer. You do not want to void your warranty. I then pulled off the push nut and then i took the screw that held on the brace in front of the worn out drum roller, then pryed off the keeper and pull off the drum roller, took off the back keeper;inspect the shaft if it is not damaged ,(this one was not),then you wait until the parts arrive, yes your dryer will set in parts for about a week, but believe me in todays economy its worth "not having to buy a new dryer" at least for this small repair. When the parts arrive everything is pretty much in reverse of how you took it apart dont forget your cell phone is also a camera that can be a "memory enhancer" for when you get this far. Also be nice to your wife your going to need a little help putting it back together. Of course if she wants her dryer back she needs to help anyways. patience is a virtue and if you dont take your time and do this right it will be tested the drum and belt need to be fitted right and held up to get both the belt on the pulley and around the tentioner and get the front panel lined up on the front of the drum good luck and pass your knowledge on its getting to be a lost art.
Read less
Was this helpful?
Thank you for voting!
Drum would not turn. Broken Belt
5 of 10 people
found this instruction helpful.
-
Ray from Boulder Creek, CA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Removed top cover. Removed front cover. Removed Drum. Located the broken belt. Found that there was no tensioner in the unit. Replaced drum rollers. Put in new tensioner. Repaced Drum with belt around it. Installed belt through tensioner and onto drive pully of motor. Supported Drum with wood block. Turned on dryer to insure drum turned w
... Read more
ithout any problems. Removed wood block. Replaced front cover and top cover. Repair compete.
Read less
Was this helpful?
Thank you for voting!
2 problems dryer ran but wouldnt heat second was the door switch spring broke iwas using a plastic clampt o hold the button in so the dryer would run
3 of 4 people
found this instruction helpful.
-
scott from seymour, IN
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
first with the dryer unpluged ,i removed the wires from the upper thermal cut off ,then with a nut driver i removed it . replaced it with the new one and reattatched the two wires then the same on the bottom thermal . to replace the spring i removed the two screws pulled out the switch and spring at the same time ,removed the br
... Read more
oken spring and replaced it onto the switch then placed it back into the dryer and replaced the screws.! everything worked like it han never been broke! my wife is verry happy!!!
Read less
Was this helpful?
Thank you for voting!
Dryer wouldn't start
2 of 2 people
found this instruction helpful.
-
Julia P. from DUNCANVILLE, TX
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Pulled back off dryer as in video and followed directions. One part in the kit was not necessary. Just replaced the fuse and put it all together again and Voila! Dryer works again.
Was this helpful?
Thank you for voting!
Dryer not heating
2 of 2 people
found this instruction helpful.
-
Chad from Yukon, OK
- Easy
- Less than 15 mins
-
Nutdriver, Pliers, Screw drivers
I removed all the screws to the back panel to gain access to the inside. checked all thermostats and fuses for conductivity (0.001 ohms) resistance. noticed the thermal cut off fuse (thermostat) was showing no conductivity (infinite ohms or OL). FYI the thermal cut-off kit I purchased included both the thermal cut-off fuse(why this is c
... Read more
alled fuse is a lie its actually a thermostat) and high limit thermostat. I'm seeing alot of users purchasing these seperate but it isn't neccessary. You might need some wire strippers with a crimper though to install everything.
Read less
Was this helpful?
Thank you for voting!
Won`t dry
2 of 2 people
found this instruction helpful.
-
Guillermo from Royal Palm Beach, FL
- Really Easy
- Less than 15 mins
-
Nutdriver
Remove backpanel, ohms cut off thermostat, no good, disconnet two wires from defective part and installed a new one.
Was this helpful?
Thank you for voting!
Dryer would not heat.
3 of 5 people
found this instruction helpful.
-
Toby from Purcellville, VA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers
Used the trouble shooting tips provided as a guide and a multimeter to test and find the defective part. Testing indicated no continuity thru the high limit thermostat. I ordered the part and received it in 3 days. Had the repair done a full week before the repairman could even come to the house and saved well over $100 in repair costs
... Read more
and 2 weeks or longer of down time. Great website and service.
Read less
Was this helpful?
Thank you for voting!
Dryer not heating
2 of 2 people
found this instruction helpful.
-
Ben from Nicholls, GA
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Wrench set
Pulled the dryer out from the wall and laid it on its front on a blanket.Removed the back panel.Disconected the two switches and replaced them with the new ones.Cleaned up dryer replaced back panel and returmed the dryer to its original place and she works just fine.
Was this helpful?
Thank you for voting!
Making all types of squealing noises
3 of 5 people
found this instruction helpful.
-
Kevin from White Haven, PA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
I changed the belt, tension pully and rollers. Runs like new now. I also took the opportunity to clean it out real good while I had it apart.
Was this helpful?
Thank you for voting!
drum made a thumping sound was really noisey
3 of 5 people
found this instruction helpful.
-
james from auburn, IN
- Really Easy
- 30 - 60 mins
-
Nutdriver, Socket set, Wrench (Adjustable)
pulled dryer away from wall took screws out of lint screen lift top removed 2 screws one on each side of front at top and removed front panel. pulled belt off drum removed drum rollers tension pulley and while i was at it pulled back cover off of heating element and blower blew everything out with air hose did a total cleaning installed e
... Read more
verything in reverse. i was amazed how fast the parts came the dryer was only down 2 days and it runs like new even if it is 20 years old i highly recommend parts slect and i will use them in the future
Read less
Was this helpful?
Thank you for voting!
Loud rumble and finally the drum stopped because the belt broke
3 of 5 people
found this instruction helpful.
-
William from Rocky Mount, VA
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
I opened the top and front of the dryer. 1st I pulled out the drum and cleaned up the lint and mess from the busted support roller. Next it was a matter of looking at the enclosed drawing and instructions. I could not believe it was that easy.
Was this helpful?
Thank you for voting!
one of my rollers fell to pieces
2 of 2 people
found this instruction helpful.
-
james from Fredericksburg, VA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
just like the guy in the video. It was easy to folow his instructions, and the best thing of all i could stop the video if I had a question and then resume!
Was this helpful?
Thank you for voting!
No Heat
2 of 2 people
found this instruction helpful.
-
Doug from Broken Arrow, OK
- Easy
- 15 - 30 mins
-
Nutdriver, Pliers
Purchased new heating element and replaced. This was the number one recommendation for the fix for my problem. I do not have any measurement devices to check any of the parts. This was trial and elimination. The old element was badly burnt. Still no heat. The second recomendation was the thermal fuse. I purchased that and replaced. Still
... Read more
no heat. After reading through some of the repair forums on this site I decided to try one more time and replace the thermal cut off kit. A little harder to do because it required cutting and replacing some wire ends. That was the problem. We now have heat and once again I have a happy wife! I left the new element and the fuse in. The dryer heats much faster than it did.
The repair videos on this site were very helpful. Some of the wire changes on the Thermal Cut-off Kit can be very confusing.
The repair videos on this site were very helpful. Some of the wire changes on the Thermal Cut-off Kit can be very confusing.
Read less
Was this helpful?
Thank you for voting!
Dryer wouldn't heat
3 of 5 people
found this instruction helpful.
-
Daniel from Pinellas Park, AL
- Easy
- 30 - 60 mins
-
Screw drivers, Socket set
I attempted to take the back panel off the dryer only to discover all I had to do (after removing 10 or so screws) is remove the lower base plate in the front of the dryer. I also had removed the door which turned out to be unnecessary. After removing a guard in front of the heating element (2 screws) I yanked the the element housing that
... Read more
contained the heating element and then disconnected the 6 wires. Using my first ever, newly bought multi meter for only $9.99 from Radio Shack, I turned the dial to the infinity section and check the element for continuency. I did this by touching the meter's two probes to the element's terminals were the wires connect. The element was fine. Then I checked the two sensors the same way. The sensor furtherest away from the element's terminals didn't have a constant signal so I assumed that that sensor was bad. Well, come to find out, one sensor is open and the other in closed... only when the temp. changes do they operate by opening and closing the current. By this time I had already ordered the part so it was too late. Surprisingly, the part came in 2 days. I ordered it Sunday night and i figured it would be sent out Monday but it was already in the air Monday morning... Great service! I replaced both sensors and the dryer works like it did when I first got it.
Read less
Was this helpful?
Thank you for voting!
Low or no heat
2 of 2 people
found this instruction helpful.
-
Frederick from NORTHWOOD, NH
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Ignor installation video. it is for a different model dryer. The part is not accessed from rear. It is accessed from the front panel. Disconnect power. Remove two screws below front panel with cross head screwdriver. Swing panel up until it releases. No need to disconnect wires just put front panel down beside the dryer. Thermostat locate
... Read more
d right in front on duct easy to identify since it has four leads. Remove wires with needle nose pliers. Remove thermostat with nut driver. Contacts are labeled but hard to read. Hold thermostat so the lead number 3 (the 3 will be upside down) is on the left. Connect blue wire. White wire to top. Purple wires to bottom and right. Reverse removal procedure and you are done.
Read less
Was this helpful?
Thank you for voting!